Announcement
Collapse
No announcement yet.
Gigabyte Z270 users.. update 1.00.16
Collapse
X
-
i bought these kits like this through newegg, this was the only way to get 32gb of ram, everything worked fine until i installed and tried to use effects on these sticks, then the one stick led rgb quit... hardware functions fine, the rgb does not, if i try to control just the single stick the ram gives an error and says no trident z rgb ram found?
-
2 kits = 2 separate kits for 2 different computers. It's not guaranteed two separate kits of RAM can run together in the same computer.
Leave a comment:
-
Has anyone found a real solution yet? I have done a complete re-format of my pc multiple times following the clean uninstall and led reset guide to no avail... I would be satisfied if the sticks would light back to factory and wait until the real non beta software arrives in 2018................. but honestly! I just want what i paid for! 2 kits = 2X8GB 4133MHZ DDR4 totaling 32GB... one stick is dead, it registers as ram and pc functions... however LED RGB is dead...
Leave a comment:
-
any news on updates for us? i really wish i could have this $340 set of ram working correctly
Leave a comment:
-
For those with modules freezing/stuck on dim or a certain setting and won't change check out my post.
https://www.gskill.us/forum/showpost...&postcount=249Last edited by nfsu127; 04-29-2017, 06:06 PM.
Leave a comment:
-
Originally posted by G.SKILL View PostWe'll have to a system run for 4-5 days and see what it does, and we'll get back next week to you on this.
Leave a comment:
-
Originally posted by KnightRider7880 View PostSince I have the same freezing issue I can answer this. All of them. Well, except any static colors because the are just steady lit anyways. On my system the RGBs will freeze after about 100 hours of on time.
Leave a comment:
-
Hi Gameface,
About those few lighting effects not working, specifically the top three (static, breathing, strobing), there's a bug where the default color has its brightness turned all the way down, even though it shows up as red. So the small circle inside the triangle is not on the lower left corner. And when you change the color by rotating the knob on the color wheel, the brightness value doesn't change. The best way to resolve this (if you are on first install or after clicking on "Default") is to click the red, green, or blue box to the left of the color wheel. Then click the button below the five color group selectors to apply the same color to all groups. After this step, you can move that color wheel to any color you want for any color group without the brightness issue.
The other lighting effects, like comet and flash and dash ignores that brightness value, so that color bug doesn't affect those lighting effects.
Regarding it being frozen after launching World of Warships, would you say that the CPU loading is high? Or if the lighting effect returns after quitting World of Warships (without restarting the lighting software)?
I'd say hold off on the new BIOS update for now, unless you have trouble reaching certain memory speeds or need support for optane devices, since it doesn't seem to have changed the lighting side very much.
Leave a comment:
-
Originally posted by G.SKILL View PostGameface,
We don't disagree that all the RGB things should work together, but working with all the vendors on the market today that put out RGB things is rather time consuming.
At the moment, uninstalling or turning off other software is merely a temporary solution for the time being until we can work something out with the other vendors. And since each software suite works differently, we'll likely put out guides when the time comes.
Also, when you say freeze, which lighting effect was it set to?
But the ones I used were "wave" and "flash and dash" Would work for some time. It seems like I'd notice they were frozen after launching World of Warships.
There is a new BIOS version, but all it says is that it provides support for Optane, so I wonder if there is any value in updating?Last edited by Gameface; 04-20-2017, 10:46 AM.
Leave a comment:
-
Originally posted by G.SKILL View PostGameface,
Also, when you say freeze, which lighting effect was it set to?
Leave a comment:
-
Gameface,
We don't disagree that all the RGB things should work together, but working with all the vendors on the market today that put out RGB things is rather time consuming.
At the moment, uninstalling or turning off other software is merely a temporary solution for the time being until we can work something out with the other vendors. And since each software suite works differently, we'll likely put out guides when the time comes.
Also, when you say freeze, which lighting effect was it set to?
Leave a comment:
-
Originally posted by Gameface View PostMine keep freezing. Not going dim since 1.00.16, but they eventually freeze. A computer restart gets them going again for a while.
I don't think there will be a real solution unless or until Gigabyte supports this in the BIOS. If G.Skill thinks turning off all other RGB control is the solution here, they are wrong. Very wrong. This needs to work with all the rest of the RGB crap I've bought or else it's worthless.
Leave a comment:
-
Originally posted by sono View PostMe neither - (Z270-Gaming 7)
I don't think there will be a real solution unless or until Gigabyte supports this in the BIOS. If G.Skill thinks turning off all other RGB control is the solution here, they are wrong. Very wrong. This needs to work with all the rest of the RGB crap I've bought or else it's worthless.
Leave a comment:
-
my one ram stick not turning on, other 3 also going crazy, early version good, new software very bad,
Leave a comment:
Leave a comment: