Announcement

Collapse
No announcement yet.

F3-19200CL10Q-32GBZHD + ASUS SABERTOOTH 990FX R2.0 + AMD FD9590FHHKWOF Fx-9590 Oem Fx

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • F3-19200CL10Q-32GBZHD + ASUS SABERTOOTH 990FX R2.0 + AMD FD9590FHHKWOF Fx-9590 Oem Fx

    System randomly locks up, here are my current settings:

    MB BIOS on latest, 2501 all defaults expect under Advanced>Ai Overclock Timer set to D.O.C.P. with voltage set to 1.65v, timings set to 10-12-12-31

    CPU temps range from 28C to 68C averaging 48C-55C, a Cooler Master Hyper 212 EVO - CPU Cooler

    Corsair 700w power supply all stuffed into a Cooler Master SE case, see http://valid.canardpc.com/qx1zud for details.

  • #2
    per the MB manual, http://dlcdnet.asus.com/pub/ASUS/mb/...h_990FX_R2.pdf , there are a lot more memory settings then those primary 4, all currently set to Auto should the other settings be setup to specifics, if so what settings should I be using?

    Comment


    • #3
      When you use the provided profile via D.O.C.P. the motherboard sets all primary and secondary timings accordingly. If that is stable, then theres nothing more to do really. If it isn't, you can try to fiddle with secondaries, esp raising tRFC to 300/350. But there is no vanilla advice really, since that is a kit optimized for Intel LGA2011/LGA1150 and D.O.C.P. is nothing more than a workaround to use Intel Extreme Memory Profiles with AMD mainboards.

      Is the system stable with 2x8GB @ D.O.C.P.?
      Team HardwareLUXX | Show off your G.SKILL products!

      Comment


      • #4
        thanks, got it set.

        Problem was heat appears removed my cooler Master 212 and replaced it with a cooler Master Nepton 280L

        Comment

        Working...
        X