Announcement

Collapse
No announcement yet.

Biostar t5-XE and F3-10666CL7D-8GBRH

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Biostar t5-XE and F3-10666CL7D-8GBRH

    Hello!
    I just upgraded to an 8gb kit! Went to BIOS to manually configure, but found more settings that if not properly set may result in system instability. Searched google and the forum, but couldn't find much information as far as specific settings for this particular kit.
    --------------------------------------
    Motherboard: BIOSTAR T5 XE LGA 1156 Intel P55 ATX Intel
    Memory: F3-10666CL7D-8GBRH
    G.SKILL Ripjaws Series 8GB (2 x 4GB) 240-Pin DDR3
    CPU: Intel Core i7-860
    BIOS: Latest (according to BIOS update software)
    --------------------------------------
    DRAM frequency 1333MHz
    B2B CAS# Latency Disabled
    Channel Interleave Auto
    Rank Interleave Auto

    DRAM tCL 7
    DRAM tRCD 7
    DRAM tRP 7
    DRAM tRAS 21
    DRAM tRRD ?
    DRAM tWR ?
    DRAM tWTR ?
    DRAM tRTP ?
    DRAM tRFC ?
    DRAM tFAW ?
    DRAM Command Rate - Auto / ?

    The voltage is currently set to Auto.
    --------------------------------------
    Here are screenshots of auto-detect settings. It seems to be stable.




  • #2
    Make sure you have the latest BIOS, then go into BIOS and simply ensure the base timings and DRAM voltage match the package specs, also will want to start w/ CR at 2T


    Pls offer comments on support I provide, HERE, in order to help me do a better job here:

    Tman

    Comment


    • #3
      Thank you for the response, Tradesman!

      I did as instructed and everything seems to be running nicely. Ran memtest and got through 2 passes. i'll let it run over the weekend to be sure, but i'm sure it'll be fine. i'm impressed with the quality of the kit. my last ram upgrade was quite the horror story.

      thanks again!

      Comment


      • #4
        Glad to hear all is well, keep us informed and in touch


        Pls offer comments on support I provide, HERE, in order to help me do a better job here:

        Tman

        Comment

        Working...
        X