Tweet
I have a Gigabyte GA-P55A-UD4P rev 2.0 w/BIOS F11 and G.SKILL F3-12800CL7D-4GBRM using an i7 875K. My problem is that I can never run memtest86 with more then one DIMM installed or the machine reboots at 2% completed. I have tried setting XMP on and off with same results. If I use some old Kingston ValueRAM (DDR3 1333) they run fine with two DIMM's installed. What's up?
-
-
Do you have them installed in the 2nd and 4th slots (away from the CPU)?
Thank you
GSKILL TECH -
Yes, they are in the second and fourth rows. I should have also mentioned that the old Kingston RAM was 1GB modules and my G.SKILL modules are 2GB each. Could that be the cause?Comment
-
No, that is not the problem. Send the memory in for new replacements and the new set should be better.
Thank you
GSKILL TECHComment
-
Problem solved... I didn't know there were other versions of memtest available. I was using memtest86 3.5 from www.memtest86.com. I have since downloaded Memtest86+ V4.10 from www.memtest.org. Since booting with that new ISO all 8GB has test ok. Thanks for the help.Comment
Comment