Today i've bought the g.skill trident DDR3-2000 PC3-16000CL9T 12go 2x(2048mo x 3), and i'll like to have some help to set it with my motherboard asus rampage3 extreme and my cpu i7 980x. I got the latest bios, the 602. Thx
Announcement
Collapse
No announcement yet.
Trident F3-16000CL9T 12gbt + asus rampage3 + i7 980x
Collapse
X
-
-
Try these settings:
AI overclock - manual
OC from CPU level up - auto
OC from Memory level up - DDR3-2000
CPU Ratio setting - 21
CPU Turbo Power Limit - disable
CPU configuration
CPU Ratio Setting - 21
C1E Support - disable
Hardware prefetcher - enable
Adjacent Cache line prefetcher - enable
Intel Virtualization tech - disabled
CPU TM Function - disable
Execute Disabled bit - disabled
Intel HT Technology - disable
Active Processor Cores - all
A20M - disabled
Intel C-STATE tech - disabled
BCLK frequency - 167
PCIE frequency - 100
DRAM frequency - 2000 MHz
UCLK frequency - 4000 MHz
QPI frequency - auto
Dram Timing Control
DRAM CAS# Latency - 9
DRAM RAS# to CAS# Delay - 9
DRAM RAS# PRE Time - 9
DRAM RAS# ACT Time - 24
DRAM Timing Mode - 2N
All others can be on AUTO
CPU voltage - 1.32V
QPI-DRAM voltage - 1.60V
DRAM Bus voltage 1.60V
Thank you
GSKILL TECH
-
Well, i've tried your setting but it doesn't work. When i've restarted, i had the message " overclocking failed" , i've disable your setting and i reloaded the default setting. If you have another solution ...thx. Maybe can i use Ai overclock = XMP ? i dunno. Actually all is in "auto" and the memory is at 1333mhz.
Comment
-
I've retryed your setting in your first post and now i've the led cpu "red" on my motherboard. I hope that my cpu isn't dead :/ My computer doesn't boot and i have a black screen....I'm using an other computer actually to talk there. I'm very very sad about it. Do you have some sugestions ?
Comment
-
Finally, the shop could repair my computer, but don't use the setting in the first post if you don't want to crash your bios and your cpu. If you use it, after you'll need to make a hot flash to rebuild your bios, if your motherboard and your cpu aren't destroyed. :/ Very dangerous setting for your computer there.Last edited by jaxx; 06-17-2010, 07:19 AM.
Comment
-
it's not a dangerous clocking / setting at all, it's quite mild for the Rampage III Extreme seeing as it's capable of memory clocks of upto 2200...
the main issue here is probably the fact that according to ASUS's memory list for the board, it does not support 12gb of this memory (6 sticks). it will only support 3 sticks of this specific memory, 6 probably makes the qpi highly unstable.
Comment
Comment