Announcement

Collapse
No announcement yet.

What do I configure other memory timings to?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • What do I configure other memory timings to?

    I have 2 sets of F3-12800CL9D-4GBRL for a total of 8GBytes.

    I have a EVGA P55LE motherboard. Initially, I took the default, "AUTO," BIOS memory settings for the motherboard which did not match what the memory packaging stated - not even close. It resulted in many MEMORY_MANAGEMENT BSOD, other BSODs and I was required to reimage my Windows7 Ultimate - 64bit. Then I went into the BIOS and did away with the "AUTO" settings I had hard values for. I hard coded some of the memory timing settings and the DIMM voltage to the values displayed on the memory packaging. I also hard coded the Command Rate to 2. The MEMORY_MANAGEMENT BSODs stopped.

    However, there are many more memory timing related configurations such as:
    tRFC, tRRD, tFAW, tRTP, tWR, tWTR, Back-to-Back CAS Delay, CHA and CHB Round Trip Latency, and a few more.

    I'm not interested in over clocking. I'm just interested in a fast stable plaform for video editing.

    What should these other memory configurations be set to to achieve my goal?

    Many thanks in advanced.

  • #2
    That's all you need to do. With the basic memory settings configured, the system will automatically pick up the rest correctly.

    Thank you
    GSKILL TECH

    Comment


    • #3
      "Auto" ok for other memory timing settings then?

      So "Auto" will suffice for these remaining memory timing settings?

      Comment


      • #4
        Yes.

        Thank you
        GSKILL TECH

        Comment

        Working...
        X