Announcement

Collapse
No announcement yet.

What are the XMP settings for G.SKILL F3-16000CL9

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • What are the XMP settings for G.SKILL F3-16000CL9

    Memory: F3-16000CL9D-4GBRH

    MB: GIGABYTE GA-P55M-UD2

    So, what are the XMP Profile1 settings for this memory? Whenever I try to use XMP the computer fails POST.
    Core i7 860 @ 133x21=2.8GHz | Arctic Cooling Freezer Pro 7 Rev 2
    Antec NSK 4480 II | Gigabyte UD2 (mATX) BIOS F4k
    GSkill Ripjaws DDR3-2000 F3 16000CL9D-4GBRH
    8GB at 133x12=1600MHz 7-7-7-22 2T tRFC=60 tRC=30
    Radeon HD 4670 1GB Core@800MHz Mem@960MHz
    WD Caviar Black 640GB 7200 RPM

  • #2
    Take a look at the BIOS configuration guide for the Gigabyte P55 platforms.

    Thank you
    GSKILL SUPPORT

    Comment


    • #3
      Gigabyte doesn't publish them.

      I found the XMP settings in the CPU-Z report. Lots of info there, and here is the relevant section:

      XMP profile XMP-2000
      Specification PC3-16000
      Voltage level 1.650 Volts
      Min Cycle time 1.000 ns (1000 MHz)
      Min tRP 8.90 ns
      Min tRCD 8.90 ns
      Min tWR 10.00 ns
      Min tRAS 26.90 ns
      Min tRC 46.90 ns
      Min tRFC 87.90 ns
      Min tRTP 6.00 ns
      Min tRRD 6.00 ns
      Command Rate 2T
      XMP timings table CL-tRCD-tRP-tRAS-tRC-CR @ frequency (voltage)
      XMP #1 9.0-9-9-28-48-2T @ 1011 MHz (1.650 Volts)
      Core i7 860 @ 133x21=2.8GHz | Arctic Cooling Freezer Pro 7 Rev 2
      Antec NSK 4480 II | Gigabyte UD2 (mATX) BIOS F4k
      GSkill Ripjaws DDR3-2000 F3 16000CL9D-4GBRH
      8GB at 133x12=1600MHz 7-7-7-22 2T tRFC=60 tRC=30
      Radeon HD 4670 1GB Core@800MHz Mem@960MHz
      WD Caviar Black 640GB 7200 RPM

      Comment

      Working...
      X