F3-2133C10D-16GAB issues

[Despotas]

Hello.

I recently bought the F3-2133C10D-16GAB kit and I cannot run it at 2133MHz.

My motherboard is the MSI P67A-GD65 (B3) with latest BIOS (v4.3) and the CPU is the i5-2500k.

Whenever I enable either one of the XMP profiles or enter settings manually at the BIOS for 2133MHz, the computer keeps restarting and usually ends up with a black screen (no video signal). Then I reset the CMOS and I run the memory at 1600MHz with no problems.

This happens on normal CPU speed and while overclocked at 4.1GHz. The memory is installed on banks 2 and 4 of the board.

Please advise.

[GSKILL TECH]

Can you post pictures of BIOS? CPU and memory settings including memory timings

Thank you

[Despotas]

OK, here are the pictures.

http://imgur.com/a/1BzIY

[GSKILL TECH]

Command Rate 2
tWR 14
tWTR 7
tRRD 6
tRTP 7


try that and let us know how it goes

[Despotas]

Same result, no video signal.
Memory timings were 10-12-12-31 + the above and all others left to Auto.

[GSKILL TECH]

Manually or XMP enabled?

[Despotas]

Manually, I did not try XMP.

[GSKILL TECH]

Can it work at 1866? Don't see why 2133 would not work.

[Despotas]

Well, just tried 1866 and it seems to be working fine.

Any other ideas for not working at 2133?