P9X79 Deluxe / F3-14900CL10Q-32GBZL Cold Boot issue

[Dissembler]

Hi All,
Hoping ye can help me!

Model of the motherboard: P9X79 Deluxe
Model of the memory: F3-14900CL10Q-32GBZL
Model of the CPU: i7-3930K @ 3.2GHz

I'm having a "Cold Boot" issue with a new build, where the machine will not start with all 32gb in place. MEMOK! and CLR_CMOS combination will eventually lead to a boot, then all is good for the day.

Pulling 2 modules, leaving 16gb in place leads to an immediate boot.
I have done a single pass on Memtest86+ on the full 32gb without incident.

I've tried both XMP profiles with no apparent change. the 2 XMP profiles themselves are practically identical:

http://i.imgur.com/Xkixc.png

Shouldn't there be a 1600 profile, or have I misunderstood something?

I have seen similar asus / g.skill cold boot issues on other threads / forums. Some of these were solved through manual adjustments. Does anyone have any suggestion on where to start with these?

Thank you in advance!

[GSKILL TECH]

Send them in for RMA to see if a new kit works better.

http://www.gskill.com/rma.php

Thank you
GSKILL TECH

[Dissembler]

Wow.
Ye fellas don't waste any time. I'll get on it.
What was the give away? Just so I know.

Thanks for the fast reply!

[GSKILL TECH]

Just sounds like there may be a problem with the modules since XMP Profile should work flawlessly.

Thank you
GSKILL TECH

[Tradesman]

Might check that you have the latest BIOS