Announcement

Collapse
No announcement yet.

F2-8500CL5D-2GBPI 2x2Gb, no BIOS POST

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • F2-8500CL5D-2GBPI 2x2Gb, no BIOS POST

    Hi,

    I'd like to have your opinion. I have a pair of F2-8500CL5D-2GBPI 2x2Gb and I've tried them on ASRock K10N750SLI and ASUS M3N-HD which both support DDR2 1066 with AM2+ CPU. They both have the newest BIOS flashed.

    However on both mobos when I install the memory modules in any way (single channel, dual channel, only one module), the BIOS won't do POST. No beep, nothing, except everything powers on.

    So this means there's no way to even configure them, except beforehand with another memory module. Please correct me if I'm wrong, with the auto settings these modules should at least work @ 800MHz, right?

    So I'm thinking either this is a complete compatibility issue or the modules are defective?

  • #2
    I would like to know this too, shouldn't it run @ DDR2-800 so that one can get into BIOS?

    Maybe try one stick at a time, the set settings?

    Comment


    • #3
      Send them in for RMA and try another kit. They should post with one installed at least.

      Thank you
      GSKILL TECH

      Comment

      Working...
      X