Announcement

Collapse
No announcement yet.

F2-8500CL5D-4GBPK w/ GA-EP45-UD3R

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    Originally posted by Tradesman View Post
    Try a single stick in slot 1 if it boots okay, try the second stick in slot one, if one works and the other doesn't may be a bad stick, if neither will boot try it in slot two, again, one at a time.. If not a bad stick, mobo may be going south
    It appears that things have become interesting.

    Here are my settings:

    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ...............: Auto
    CPU Clock Ratio ..........................: 8x
    Fine CPU Clock Ratio.....................:.+0.5x
    CPU Frequency ...........................: 3.40Ghz (400x8.5)


    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control..................: [Enabled]
    CPU Host Frequency (Mhz) ............: 400
    PCI Express Frequency (Mhz) .........:100

    C.I.A.2 .................................:[Disabled]


    Advanced Clock Control [Press Enter]
    CPU Clock Drive...........................: <<< 800
    PCI Express Clock Drive.................: <<< 900
    CPU Clock Skew (ps)....................: <<<
    MCH Clock Skew (ps)...................: <<<


    DRAM Performance Control
    Performance Enhance...................: [STANDARD]
    Extreme Memory Profile (X.M.P.).....: Disabled
    (G)MCH Frequency Latch...............: [Auto]
    System Memory Multiplier ..............: 2.60D
    Memory Frequency (Mhz) 1066..............: 1066
    DRAM Timing Selectable ................: [Manual]

    Standard Timing Control
    CAS Latency Time........................ 5 [5]
    tRCD ......................................... 5 [5]
    tRP'........................................... 5 [5]
    tRAS.......................................... 15 [15]

    Set all Suggested below to highest Values first. Then later you can lower, one at a time, testing as you go

    Advanced Timing Control
    tRRD........................................... 4 [Auto]
    tWTR.......................................... 4 [Auto]
    tWR............................................ 13 [Auto]
    tRFC........................................... 68 [Auto]
    tRTP........................................... 4 [Auto]
    Command Rate (CMD) ....................:0 [2]

    Driving Strength Profiles
    Driving Strength ............................ Auto

    Channel A
    Static tRead Value.........................:8
    tRD Phase0 Adjustment...................:Auto
    tRD Phase1 Adjustment...................:Auto
    tRD Phase2 Adjustment .................:Auto
    tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto
    Twr2wr(Different Rank)...................:Auto
    Twr2rd(Different Rank)...................:Auto
    Trd2wr(Same/Diff Rank)..................:Auto
    Dimm1 Clock Skew Control...............:Auto
    Dimm2 Clock Skew Control...............:Auto

    Channel B
    Static tRead Value.........................:8
    tRD Phase0 Adjustment...................:Auto
    tRD Phase1 Adjustment...................:Auto
    tRD Phase2 Adjustment .................:Auto
    tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto
    Twr2wr(Different Rank)...................:Auto
    Twr2rd(Different Rank)...................:Auto
    Trd2wr(Same/Diff Rank)..................:Auto
    Dimm1 Clock Skew Control...............:Auto ps
    Dimm2 Clock Skew Control...............:Auto ps

    Motherboard Voltage Control

    CPU
    CPU Vcore….……….........................: 1.1875 [1.20625]

    CPU Termination…..... 1.200V*.......: 1.200V

    CPU PLL…………………....1.500V*.......: 1.500V

    CPU Referen.…………....0.755V*.......: Auto

    CPU Reference2………,,0.800V*.......: Auto

    MCH/ICH
    MCH Core…………….....1.100V...........: 1.200V
    MCH Reference….…….0.760V...........; Auto
    MCH/DRAM Ref.…......0.900V...........: Auto
    ICH I/O……………….....1.500V............: 1.500V
    ICH Core…………...……1.100V............: 1.100V

    DRAM
    DRAM Voltage ……....1.800V............: 2.100V
    DRAM Termination .…0.900V............: Auto
    Channel A Reference 0.900V............: Auto
    Channel B Reference 0.900V............: Auto

    Advanced Settings
    Limit CPUID Max. to 3.....................: [Disabled]
    No-Execute Memory Protect............: [Enabled]
    CPU Enhanced Halt (C1E)................: [Enabled]
    C2/C2E State Support....................: [Disabled]
    x C4/C4E State Support..................: [Disabled]
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.........................: [Enabled]
    Virtualization Technology................: [Enabled]

    Integrated Peripherals
    Legacy USB Storage Detect ..............[Disabled]
    I ran a single RAM in slot #2 and it passed Memtest twice. I then tried putting the same successful RAM in slot #1 and this is what I got:


    A billion errors in 20 seconds.

    I then tried my second RAM stick and put it in slot #2. By now, I am certain that my mobo has a dysfunctional slot #1 and #3.


    Does that mean that my second RAM stick is bad?

    Also, the reason why I ran MemTest was because I had OCed my system to 3.825Ghz with 2 sticks at 800Mhz speed. Things were going perfectly up until the 7th minute when it froze:

    Last edited by ssnipazz; 11-10-2009, 12:43 PM.

    Comment


    • #17
      Here's the update:

      1st RAM Stick in Slot #2:

      Looks like this one is broken to me. I will RMA to G.Skill, unless somebody objects.

      2nd RAM Stick in Slot #2:

      2 hours and 4 complete passes, this one is good.

      2nd RAM Stick in Slot #1:

      Computer screen froze in 6 seconds lol. My motherboard's Slot #1 and #3 are FUBAR. It'll be replaced in Winter Break.

      Looks like I need to RMA my 1st RAM stick. Looks like my motherboard needs to be replaced as well... I'm unlucky!

      Andy

      Comment


      • #18
        How long does it usually take to get an RMA code e-mailed back to me?

        Comment


        • #19
          I received my new stick of RAM today via USPS. It passed 2 tests on MemTest 4.0 at 1066. I then ran both sticks in slots #2 and #4, and tons of errors appeared. Tried testing a single stick in slot #4 and tons of errors appeared.

          I guess it's time to get the motherboard replaced. The only RAM slot that works without flaw is slot #2. Why I chose to order a mobo via internet is beyond me... I hate RMAs and waiting days for them.

          Good news:
          - RAM problem solved.
          - G.Skill's tech support is awesome.
          - G.Skill's customer service is great.
          - Only took 5 business days to deliver the new RAM.

          Bad news:
          - Motherboard is FUBAR.
          - I hear Gigabyte's RMA process takes a long while, so I dread returning the mobo until school ends.

          Comment


          • #20
            If you got it at the Egg they might RMA it for you, might be quicker.


            Pls offer comments on support I provide, HERE, in order to help me do a better job here:

            Tman

            Comment


            • #21
              Hehe, I'd love to but I was too hasty when I first got all my computer parts and I sent in the rebate for the mobo. Newegg won't accept any RMAs if I do that.

              Andy

              Comment


              • #22
                That issue according to the memtest86+ you run there are tRD errors the Read Delay too low for some reason or it is too fast copy/switch 'data direction' error.

                tStatic Read 8 might be good, but I think the Phase tRD adjustments are dropping it too low on Auto. You should get 'tStatic Read' to 10T and try with that. not exactly sure on this board what or how the 'tRD PhaseX Adjustment' works is that like +Xt when added or are they individual values. Trademan might give some light on that. Either way, the tRD or in Windows 'Performance Level' by many applications (MemSet). Should be minimum of tCL + (multiplier dependable 266Mhz = +0, 333Mhz(usual) = +2T, 400Mhz = +2-3T to be stable).

                -edit-

                If I am incorrect CL6-6-6-18 should drop errors also. Just in case this is board/memory specified error would be nice to test that one.

                -edit 2-

                You could also make clear that it ain't the too fast read / write switch (forgot to write on first message as mentioned 'data directions' & switch):
                Trd2rd(Different Rank) = 6T
                Twr2wr(Different Rank) = 6T
                Twr2rd(Different Rank) = 5T
                Trd2wr(Same/Diff Rank) = 8T
                (Applies to Channel A & B)

                This would basically kill the idea that board would down latency the basic read write latencies which would generate errors. Anyway, it ain't voltage so you can forget that one to like 2.1v would be nice probably even lower should do, but no harm on 2.1v.


                2 cents
                Last edited by genetix; 11-21-2009, 01:42 PM.
                "Sex is like freeware, shareware on weekends. When do we get to open source?" -TwL

                Thanks AMD/ATI for banning legit customers who asks questions of your screw-ups:
                http://i45.tinypic.com/30j0daq.png

                Comment


                • #23
                  If Genetix ideas don't work and still thinking RMA, contact the Egg, tell them the boards got a faulty DRAM slot and you would like a straight exchange, they will probably go for it


                  Pls offer comments on support I provide, HERE, in order to help me do a better job here:

                  Tman

                  Comment


                  • #24
                    Thank you for the quick reply. I will try everything genetix has recommended. If anything fails, I will contact Newegg. If they won't let me replace the mobo, I'll have Gigabyte do it.

                    - Andy

                    Comment


                    • #25
                      Don't think they'll hassle you, but if they do, be firm and let them know THEY sent the defective mobo and you've been trying to get it to work, but both Gigabyte and GSkill say it's bad.


                      Pls offer comments on support I provide, HERE, in order to help me do a better job here:

                      Tman

                      Comment


                      • #26
                        yeah, +1 for that.

                        Although, good news is if any of that stuff I wrote above gives error free round. All latencies can be then tweaked accordingly and we would know exactly where the problem is which would be nice.

                        One more time in clean row all values (got messy above on edits so this is same as my previous message):
                        Speed: 800Mhz
                        tCL: 5
                        tRCD: 5
                        tRP: 5
                        tRAS: 15
                        tWR: 8

                        tStatic Read = 10T (or make sure tRD Phase adjustment on everything is neutral at 9T)
                        Trd2rd(Different Rank) = 6T
                        Twr2wr(Different Rank) = 6T
                        Twr2rd(Different Rank) = 5T
                        Trd2wr(Same/Diff Rank) = 8T

                        DRAM Voltage: 2.1v
                        DRAM Termination: 1.050
                        Last edited by genetix; 11-21-2009, 11:54 PM.
                        "Sex is like freeware, shareware on weekends. When do we get to open source?" -TwL

                        Thanks AMD/ATI for banning legit customers who asks questions of your screw-ups:
                        http://i45.tinypic.com/30j0daq.png

                        Comment

                        Working...
                        X