Announcement

Collapse
No announcement yet.

Stabilizing memory problem in GA-MA785GM-US2H

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Stabilizing memory problem in GA-MA785GM-US2H

    Figured out the constant restarting of the computer was do to memory problems. Here's what I did so far and tell me if I can do anything different.
    Motherboard GA-MA785GM-US2H
    CPU AMD PH II X6 3.3
    Memory F2-6400CL5D-2GBNQ x 2 and F2-6400CL5D-4GBPQ
    Sapphire 6850 PCI-e

    Timing set to 5-5-5-15 manually, DRAM Voltage 1.8, Command Rate 2T, Speed 800, tRFC at 195 and up the NB voltage to 1.3V

    Anything else I should do? Is this safe for the CPU and board?
    thanks

  • #2
    Sounds good for a combination of the different sticks


    Pls offer comments on support I provide, HERE, in order to help me do a better job here:

    Tman

    Comment


    • #3
      Can I push it a little more?

      Ok thanks. the 1.3V on the NB won't be too much. And could I increase the DRAM to 1.9V without too many problems?

      Comment


      • #4
        If you increase DRAM voltage, I'd take it up in small increments and not more than is needed.


        Pls offer comments on support I provide, HERE, in order to help me do a better job here:

        Tman

        Comment


        • #5
          I probably won't change a thing then if it is working. thanks for the help.

          Comment


          • #6
            No problem, keep in touch


            Pls offer comments on support I provide, HERE, in order to help me do a better job here:

            Tman

            Comment

            Working...
            X