I have the: G.SKILL Ripjaws X Series 8GB (2 x 4GB) F3-2133C9D-8GXL
So far, enabling XMP profiles 1 and 2 results in a boot failure. Going in and manually adjusting the timings works, however if I manually change the speed to >1600, it will not boot. I have tried to change the DRAM voltage, but that doesn't work either. For some reason, my bios won't let me do 1.65v, but it will let me put in 1.64v and 1.66v.
Here are some pictures of the current state:
Not sure if its my processor or mobo that's holding me back.
System Specs:
Gigabyte GA-Z68AP-D3
i5 2500k 3.3 Overclocked to 4.0
EVGA GTX770
Corsair TX650w
Any help would be appreciated.
So far, enabling XMP profiles 1 and 2 results in a boot failure. Going in and manually adjusting the timings works, however if I manually change the speed to >1600, it will not boot. I have tried to change the DRAM voltage, but that doesn't work either. For some reason, my bios won't let me do 1.65v, but it will let me put in 1.64v and 1.66v.
Here are some pictures of the current state:
Not sure if its my processor or mobo that's holding me back.
System Specs:
Gigabyte GA-Z68AP-D3
i5 2500k 3.3 Overclocked to 4.0
EVGA GTX770
Corsair TX650w
Any help would be appreciated.
Comment