CPU : AMD YD2400C5FBBOX Ryzen 5 2400G Processor with Radeon RX Vega 11 Graphics
Motherboard : ASUS TUF B450 Gaming Motherboard (TUF B450M-Plus Gaming)
RAM : G.SKILL F4-3000C16D-16GTZR
Storage : Samsung 970 EVO Plus (MZ-V7S500B/AM)
Graphics : *none* (using build-in Radeon RX Vega 11 Graphics)
Other : EVGA 600 BR Power Supply (BR-0600-K1)
BIOS : Version 2006 (2019/11/25) **CURRENT**
Regarding BIOS version, please note that I have this problem since the beginning when I purchase the G.SKILL RAM (may 2019) and since then I updated like 5 or 6 times the BIOS with the same result.
As soon as I enable the D.O.C.P. mode to PROFILE 1, the computer is POST-ing and not booting anymore. The D.O.C.P. mode detects the appropriate parameters according the the RAM specs... 3000 Mhz, 1.35V and CL16-18-18-38 timing.
If I leave the D.O.C.P. mode disabled and run with the basic settings (1.2V, 2133 Mhz), the computer is working flawlessly.
Any suggestions? I contacted ASUS already and they indicates that this specific RAM by G.SKILL is fully supported at 3000 Mhz...
Motherboard : ASUS TUF B450 Gaming Motherboard (TUF B450M-Plus Gaming)
RAM : G.SKILL F4-3000C16D-16GTZR
Storage : Samsung 970 EVO Plus (MZ-V7S500B/AM)
Graphics : *none* (using build-in Radeon RX Vega 11 Graphics)
Other : EVGA 600 BR Power Supply (BR-0600-K1)
BIOS : Version 2006 (2019/11/25) **CURRENT**
Regarding BIOS version, please note that I have this problem since the beginning when I purchase the G.SKILL RAM (may 2019) and since then I updated like 5 or 6 times the BIOS with the same result.
As soon as I enable the D.O.C.P. mode to PROFILE 1, the computer is POST-ing and not booting anymore. The D.O.C.P. mode detects the appropriate parameters according the the RAM specs... 3000 Mhz, 1.35V and CL16-18-18-38 timing.
If I leave the D.O.C.P. mode disabled and run with the basic settings (1.2V, 2133 Mhz), the computer is working flawlessly.
Any suggestions? I contacted ASUS already and they indicates that this specific RAM by G.SKILL is fully supported at 3000 Mhz...