Hi,
I need help bumping up the memory speed.
I have 4 sticks of F4-4000C19D-32GTZR and I managed to get them to 3400 MHz with 14-14-30 and 1.39375 V. With only 2 sticks both pairs of F4-4000C19D-32GTZR run at 4000 MHz with the XMP2 profile. I do understand that for 4 sticks we have to go manual -- though that was a surprise.
I have tried 3600 at 16-16-36 and 1.45V plus a few other configurations but with no luck.
This is for a daily driver (16 hours a day, 7 days a week)
i9-10900K - 5.2 GHz all cores
ROG STRIX Z490-E Gaming
64GB (4x16GB) F4-4000C19D-32GTZR
Settings:
Can you help?
Thanks!
I need help bumping up the memory speed.
I have 4 sticks of F4-4000C19D-32GTZR and I managed to get them to 3400 MHz with 14-14-30 and 1.39375 V. With only 2 sticks both pairs of F4-4000C19D-32GTZR run at 4000 MHz with the XMP2 profile. I do understand that for 4 sticks we have to go manual -- though that was a surprise.
I have tried 3600 at 16-16-36 and 1.45V plus a few other configurations but with no luck.
This is for a daily driver (16 hours a day, 7 days a week)
i9-10900K - 5.2 GHz all cores
ROG STRIX Z490-E Gaming
64GB (4x16GB) F4-4000C19D-32GTZR
Settings:
AI Overclock Tuner: Manual
ASUS Multicore Enhancement: Enabled
AUX Instruction Core Ratio Negative Offset: 0
CPU Core Ratio Synch: All Cores
All-Core Ratio Limit: 52 (5.2 GHz)
BCLK Aware Adaptative Voltage: Disabled
CPU Core/Cash Voltage: Manual Mode
CPU Core Voltage Override: 1.35 V
DRAM Frequency: 3400 MHz
DRAM Voltage: 1.39375 V
Min. CPU Cache Ratio: 50 (5.0 GHz)
Max. CPU Cache Ratio: 50 (5.0 GHz)
CPU Core/Cache Current Limit Max.: 255.75
Long Duration Package Powe Limit: 4095
Short Duration Package Powe Limit: 4095
CPU Load Line Calibration: Level 7
DRAM CAS# Latency: 14
DRAM RAS# to CAS# Delay: 14
DRAM RAS# ACT Time: 30
All other settings: Auto
Temps high 80's with Cinebench R20
ASUS Multicore Enhancement: Enabled
AUX Instruction Core Ratio Negative Offset: 0
CPU Core Ratio Synch: All Cores
All-Core Ratio Limit: 52 (5.2 GHz)
BCLK Aware Adaptative Voltage: Disabled
CPU Core/Cash Voltage: Manual Mode
CPU Core Voltage Override: 1.35 V
DRAM Frequency: 3400 MHz
DRAM Voltage: 1.39375 V
Min. CPU Cache Ratio: 50 (5.0 GHz)
Max. CPU Cache Ratio: 50 (5.0 GHz)
CPU Core/Cache Current Limit Max.: 255.75
Long Duration Package Powe Limit: 4095
Short Duration Package Powe Limit: 4095
CPU Load Line Calibration: Level 7
DRAM CAS# Latency: 14
DRAM RAS# to CAS# Delay: 14
DRAM RAS# ACT Time: 30
All other settings: Auto
Temps high 80's with Cinebench R20
Can you help?
Thanks!
Comment