Announcement

Collapse
No announcement yet.

Crosshair IV Formula & Trident 2000

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    2N, 2T, N2, T2 are all the same.

    The Tridents may operate 1T, we state 2T because not all CPUs and system can operate 1T.

    anu,

    You will need to raise the CPU FSB Host Frequency to reach higher memory frequency. Some CPUs have locked multipliers, so you can use the max multiplier and then raise CPU FSB to reach your target frequency.

    Thank you
    GSKILL TECH

    Comment


    • #17


      I put the RAM in the red slots, i becomes Loops, in the black One, the computer do want to start.
      I tried to rise NB and SB frequency and the voltage, no luck with this.

      When my timings are higher will be the Rams stable with a higher frequency ?
      What BIOS settings I must disable ?

      Comment


      • #18
        Yes, if you raise timings your DRAM Frequency should go up. Which particular memory kit do you have?

        Thank you
        GSKILL TECH

        Comment


        • #19
          F3-17066CL9D-4GBTDS
          DDR3-2133 2x2GB

          In the Timings Table, the TRc is 48 for 2134 MHz, but i can't set this. The maximum is 41. Whether it depends on the CPU, how high is the TRC?
          Sorry for my Englisch.
          Thanks in Advance

          Comment


          • #20
            You can leave tRC to AUTO, many times the tRC in timings table may not be exactly what the memory wants. Looks like you have a very good set of memory though, so keep up the good work! =)

            Thank you
            GSKILL TECH

            Comment

            Working...
            X