Hey for all of you with ram defaulting to 1333 after cold reboot, it does appear to be a board issue. After forum crawling for several hours I found the solution that fixed my issue, it is as follows;
1. reset cmos
2. enter bios
3. set xmp mode porfile 1
4. reenter any bios setting you may have changed
5. set apm to pcie enable
6>save and exit.
this seems to have solved the issue
1. reset cmos
2. enter bios
3. set xmp mode porfile 1
4. reenter any bios setting you may have changed
5. set apm to pcie enable
6>save and exit.
this seems to have solved the issue
Comment