Announcement

Collapse
No announcement yet.

F3-10666CL8D-4GBRM on GA-P55-UD3R (BIOS settings)

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • F3-10666CL8D-4GBRM on GA-P55-UD3R (BIOS settings)

    Just wondering what the BIOS settings are for this motherboard and RAM. I haven't been able to find anything substantial and I want to make sure everything is configured correctly.

    Thanks,
    byte

  • #2
    Make the following changes and everything should be working properly.

    Advanced CPU Features:
    CPU Clock Ratio ................................ [21x]
    Intel(R) Turbo Boost Tech .................. [Disabled]
    CPU Cores Enabled ............................ [All]
    CPU Multi Threading .......................... [Enabled]
    C3/C6/C7 State Support ................... [Auto]
    CPU Enhanced Halt (C1E) ................... [Auto]
    C3/C6/C7 State Support .................... [Auto]
    CPU Thermal Monitor ......................... [Auto]
    CPU EIST Function ............................ [Disabled]
    Virtualization Technology ................... [Disabled]
    Bi-Directional PROCHOT ..................... [Auto]

    Standard Clock Control:
    Base Clock (BCLK) Control ................ [Enabled]
    BCLK Frequency (MHz) ..................... 133
    PCI Express Frequency (MHz) ........... [100]

    C.I.A.2 [Disabled]

    Advanced Clock Control:
    CPU Clock Drive ..............................[800mV]
    PCI Express Clock Drive ................... [900mV]
    CPU Clock Skew ............................. [0ps]


    Advanced DRAM Features:
    Extreme Memory Profile (X.M.P) ......... [Disabled]
    System Memory Multiplier (SPD) ........ [10.0]
    Performance Enhance ...................... [Standard]
    DRAM Timing Selectable (SPD) .......... [Expert]

    Channel A + B + C

    Channel A Timing Settings:
    ##Channel A Standard Timing Control##
    CAS Latency Time ...................... 8
    tRCD ....................................... 8
    tRP ......................................... 8
    tRAS ....................................... 24

    ##Channel A Advanced Timing Control##
    Command Rate (CMD) ................ 2

    Advanced Voltage Control:

    CPU
    Load Line Calibration ................. [Disabled]
    CPU Vcore ............................... 1.275 [1.275]
    QPI/VTT Voltage 1.150v ............ 1.100V [1.100V]
    CPU PLL 1.800v ....................... 1.800v [1.800V]

    DRAM
    DRAM Voltage 1.500v .............. 1.500V

    If you want a safe CPU overclock, use these settings:

    Advanced CPU Features:
    CPU Clock Ratio ................................ [20x] 3.3GHz
    Intel(R) Turbo Boost Tech .................. [Disabled]
    CPU Cores Enabled ............................ [All]
    CPU Multi Threading .......................... [Enabled]
    C3/C6/C7 State Support ................... [Auto]
    CPU Enhanced Halt (C1E) ................... [Auto]
    C3/C6/C7 State Support .................... [Auto]
    CPU Thermal Monitor ......................... [Auto]
    CPU EIST Function ............................ [Disabled]
    Virtualization Technology ................... [Disabled]
    Bi-Directional PROCHOT ..................... [Auto]

    Standard Clock Control:
    Base Clock (BCLK) Control ................ [Enabled]
    BCLK Frequency (MHz) ..................... 167
    PCI Express Frequency (MHz) ........... [100]

    C.I.A.2 [Disabled]

    Advanced Clock Control:
    CPU Clock Drive ..............................[800mV]
    PCI Express Clock Drive ................... [900mV]
    CPU Clock Skew ............................. [0ps]


    Advanced DRAM Features:
    Extreme Memory Profile (X.M.P) ......... [Disabled]
    System Memory Multiplier (SPD) ........ [8.0]
    Performance Enhance ...................... [Standard]
    DRAM Timing Selectable (SPD) .......... [Expert]

    Channel A + B + C

    Channel A Timing Settings:
    ##Channel A Standard Timing Control##
    CAS Latency Time ...................... 8
    tRCD ....................................... 8
    tRP ......................................... 8
    tRAS ....................................... 24

    ##Channel A Advanced Timing Control##
    Command Rate (CMD) ................ 2

    Advanced Voltage Control:

    CPU
    Load Line Calibration ................. [Disabled]
    CPU Vcore ............................... 1.275 [1.300]
    QPI/VTT Voltage 1.150v ............ 1.100V [1.200V]
    CPU PLL 1.800v ....................... 1.800v [1.900V]

    DRAM
    DRAM Voltage 1.500v .............. 1.500V

    Thank you
    GSKILL SUPPORT

    Comment


    • #3
      Will the settings be the same on a GA-P55-USB3?

      Comment


      • #4
        Yes.

        Thank you
        GSKILL TECH

        Comment

        Working...
        X