Announcement

Collapse
No announcement yet.

F3-19200CL10Q2-64GBZHD = End of Life ?

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
  • #1

    F3-19200CL10Q2-64GBZHD = End of Life ?

    Hello!

    This memory is not on the QVL list for the
    Asus Rampage Extreme IV and Black Edition Mainboard (but it was before).

    Now on the QVL list are only two Mainboards:

    ASUS
    X79
    X79 DELUXE (x8 DIMM)

    MSI
    X79
    X79A-GD45 Plus (x8 DIMM)

    Does that mean you have removed both MB (REIV&Black Edition) from the compatiblity list?

    Or did you removed them because the memory is end of life?

    When i use the memory config tool, this memory is NOT listed anymore (but it was listed before!).

    Can you explain what happend?

    I already owned the F3-19200CL10Q2-64GBZHD Memory before
    but i cant get the mem stable with my Asus REIV and the 3960X CPU.

    Now i own a 4960X and maybe the memory will run @ full DDR3-2400 CL10.

    Maybe i would like to buy this memory again but it must run stable @REIV and the Black Edition...


    Another Question:

    the height is 40 mm is that only the headspreader or the full height of the memory with golden contacts?

    It should fit with my Noctua NH-D14 cpu cooler.
    Last edited by Tenchi; 04-08-2014, 03:12 AM.
    Intel i7-980X @ Noctua NH-D14 | Asus Rampage III Extreme| MSI GTX580 Lightning XE | 24GB G.Skill DDR3-1600 CL7 F3-12800CL7T-12GBSR | Intel X25-E 64GB & X25-M 80GB | 3x600GB WD6000HLHX VelociRaptor & 1xWD2001FASS 2 TB | Teac DV-W5000S & Pioneer DVR-216D | Seasonic X-650 | Lian Li TYR PC-X2000F @bequiet Silentwings USC |
    Tags: None
  • #2
    REIV and Black Edition has some issues with 64GB DDR3-2400. Set it to DDR3-2133 and it will be perfect.

    The total memory height is 40mm, so once it sinks into the memory slot, it only needs about 38mm. The Noctua cooler will fit just fine.

    Thank you
    GSKILL TECH

    Comment

    • #3
      Originally posted by GSKILL TECH View Post
      REIV and Black Edition has some issues with 64GB DDR3-2400.
      Can you go into detail why is that?

      ASUS itself stated they burned through quite some PCB / trace configurations and also improved power components for the dimm slots to enhance the R4BE's memory capabilities. It would be kinda silly, if that board still couldn't run 8x8GB DDR3-2400+ despite all that effort (while some cheaper and probably less tuned towards overclocking models can).
      Team HardwareLUXX | Show off your G.SKILL products!

      Comment

      • #4
        It should be an issue with BIOS, hopefully a revision is released shortly to solve it.

        Thank you
        GSKILL TECH

        Comment

        • #5
          Thanks, for your input.
          Team HardwareLUXX | Show off your G.SKILL products!

          Comment

          • #6
            Yes, thanks for the Info!

            But the Asus X79 Deluxe will run @full DDR3-2400 ?
            Intel i7-980X @ Noctua NH-D14 | Asus Rampage III Extreme| MSI GTX580 Lightning XE | 24GB G.Skill DDR3-1600 CL7 F3-12800CL7T-12GBSR | Intel X25-E 64GB & X25-M 80GB | 3x600GB WD6000HLHX VelociRaptor & 1xWD2001FASS 2 TB | Teac DV-W5000S & Pioneer DVR-216D | Seasonic X-650 | Lian Li TYR PC-X2000F @bequiet Silentwings USC |

            Comment

            • #7
              Yes.

              Thank you
              GSKILL TECH

              Comment

              Previous template Next
              Working...
              X