G.SKILL TECH FORUM

Go Back   G.SKILL TECH FORUM ? Product Discussion ? DDR2 ? DDR2 BIOS Configuration Guides

DDR2 BIOS Configuration Guides Look for your specific motherboard and memory package to properly set the BIOS so that your memory is operating optimally.

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 08-03-2009, 03:46 PM
GSKILL TECH's Avatar
GSKILL TECH GSKILL TECH is offline
Administrator
 
Join Date: Jul 2008
Location: Los Angeles, California
Posts: 10,890
GSKILL TECH has disabled reputation
Default F2-8500CL5D-4GBPK + ASUS M4N82 Deluxe BIOS settings

AI Overclocking - Manual
DRAM Frequency Control - Manual
DRAM Frequency - 1066

Memory Configuration (submenu)
DCT Unganged Mode - Enabled
Power Down Enable - Disabled

DRAM Timing Configuration (submenu)
DRAM Command Rate - 2
DRAM Timing Mode - Both
DCT0:
TCL - 5 CLK
TRCD - 5 CLK
TRP - 5 CLK
TRTP - 5 CLK
TRAS - 15 CLK
TRC - 31 CLK (may need to increase up to 42 for 8GB)
TWR - 8 CLK
TRRD - 4 CLK

TWTR - 4 CLK
TRFC0 - 127.5 (195 for 8GB, 4 sticks)
TRFC1 - 75 (127.5 for 8GB, 4 sticks)

DCT1:
Enter same values as above if using these slots, or if operating full slots.

DRAM Voltage - 2.1V
HT Voltage - 1.3V
CPU-NB Voltage - 1.2V (1.4V for 8GB, 4 sticks)

Thank you
GSKILL SUPPORT
__________________
Are you an overclocker? Have screen shots of your OC results? Please post and share your OC experience!

The new G.Skill Overclocking Section!

http://www.gskill.us/forum/forumdisplay.php?f=43

Last edited by GSKILL TECH; 10-12-2010 at 08:47 AM.
Reply With Quote
  #2  
Old 04-20-2010, 08:50 AM
phatdave phatdave is offline
Junior Member
 
Join Date: Apr 2010
Posts: 3
phatdave is reading into overclocking
Default would not post

i have tried these setting s with my mobo but there is no 42
Reply With Quote
  #3  
Old 04-20-2010, 12:03 PM
GSKILL TECH's Avatar
GSKILL TECH GSKILL TECH is offline
Administrator
 
Join Date: Jul 2008
Location: Los Angeles, California
Posts: 10,890
GSKILL TECH has disabled reputation
Default

What CPU do you have? Have you tested both kits before putting them together?

Thank you
GSKILL TECH
__________________
Are you an overclocker? Have screen shots of your OC results? Please post and share your OC experience!

The new G.Skill Overclocking Section!

http://www.gskill.us/forum/forumdisplay.php?f=43
Reply With Quote
  #4  
Old 05-07-2010, 01:41 PM
phatdave phatdave is offline
Junior Member
 
Join Date: Apr 2010
Posts: 3
phatdave is reading into overclocking
Default

my processor is amd phenom 2 black edition x4 955 am3.

and yes i did try the two 1 at a time
Reply With Quote
  #5  
Old 05-07-2010, 03:10 PM
GSKILL TECH's Avatar
GSKILL TECH GSKILL TECH is offline
Administrator
 
Join Date: Jul 2008
Location: Los Angeles, California
Posts: 10,890
GSKILL TECH has disabled reputation
Default

I am assumimg both kits tested fine seperately? Do you have the latest BIOS? Post your own thread so we can troubleshoot the problem.

Thank you
GSKILL TECH
__________________
Are you an overclocker? Have screen shots of your OC results? Please post and share your OC experience!

The new G.Skill Overclocking Section!

http://www.gskill.us/forum/forumdisplay.php?f=43
Reply With Quote
  #6  
Old 05-10-2010, 02:56 PM
phatdave phatdave is offline
Junior Member
 
Join Date: Apr 2010
Posts: 3
phatdave is reading into overclocking
Default

they tested at 800 mhz and yes i have the new bios
Reply With Quote
  #7  
Old 05-10-2010, 03:14 PM
GSKILL TECH's Avatar
GSKILL TECH GSKILL TECH is offline
Administrator
 
Join Date: Jul 2008
Location: Los Angeles, California
Posts: 10,890
GSKILL TECH has disabled reputation
Default

Try each stick at DDR2-1066. Sounds like one piece of hardware may be defective, so we will need to troubleshoot it.

Thank you
GSKILL TECH
__________________
Are you an overclocker? Have screen shots of your OC results? Please post and share your OC experience!

The new G.Skill Overclocking Section!

http://www.gskill.us/forum/forumdisplay.php?f=43
Reply With Quote
Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -8. The time now is 03:47 PM.


Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2013, Jelsoft Enterprises Ltd.
All rights reserved. Copyright ©1989-2013, G.Skill International Enterprise