64 GB Kit RipJaws (F3-12800CL10Q2-64GBZ) in an ASUS P9X79

cdub · #1 07-11-2012, 03:37 PM

RipJaws (F3-12800CL10Q2-64GBZ)
ASUS P9X79 DELUXE - BIOS 1203
i7 3930K

My previous thread got hijacked - (they got help - I still have a problem).

Currently I have the ram timings set correctly. the dram voltage at 1.55 , the VCCSA at 1.200 and VCORE set to 1.200.

What other settings are necessary for a stable system?

Thank you.

Tradesman · #2 07-11-2012, 05:43 PM

Sorry lost you on the other thread, haven't been out here in the forum as often as I'd like, on the other thread just offered this:

Have you tried VCCSA 1.25 and CPU VTT 1.2, then stock timings 2T and stock DRAM voltage

will try and review your original thread and dig out my notes on your mobo see if I've used that set, think so, but not positive at the moment, had a guy on the Home repair business side move to CA and am covering the jobs he was scheduled for so it's been 4:30AM to between 5-6PM then more systems work in the evenings

cdub · #3 07-11-2012, 06:02 PM

I have now upped the VCCSA to 1.250

On my BIOS there is a setting called VTTCPU Voltage. I have never changed it from auto.
When I change it higher than 1.1 the color changes to yellow - higher than 1.15 ithe color changes to red. Is this the setting that you want at 1.2?
Leaving it @ 1.15 for the moment.
Thanks

Tradesman · #4 07-11-2012, 06:18 PM

1.1 to 1.5 is fine for testing, I normally hop to about 1.2 and work my way down, let's see how the 1.15 does with the additional VCCSA

cdub · #5 07-11-2012, 06:22 PM

Thanks Tman - will give it a workout tomorrow & see it it's better.

Tradesman · #6 07-11-2012, 06:37 PM

Let me know, I'll be in and out sporatically

cdub · #7 07-13-2012, 08:32 AM

System locked up - upped the VTTCPU voltage to 1.20 and still no stability. It continues to lock up whith VTTCPU set to 1.20

What to try next?

Thanks

cdub · #8 07-13-2012, 03:10 PM

Tradesman - any advice to carry me into the weekend for further testing is appreciated!

Tradesman · #9 07-13-2012, 04:07 PM

Could you post your BIOS settings DRAM timings (basic and advanced) and system voltages, might give me an idea or two.....and I'll be in off and on all weekend, though Sat will be early AM and then later in the afternoon, going to buzz up to Phoenix and hit Fry's Electronics, Cabela's and Bass Pro Shops.

cdub · #10 07-14-2012, 06:59 PM

Tman,
Turn of events. I reset the bios via MB button. Did not use the XMP. Manually set the first timings only. Might have found stability. Will post back.
Thanks