| DDR3 Looking for help with DDR3 memory? Post a thread in here |

07-03-2012, 12:27 PM
|
|
Junior Member
|
|
Join Date: Dec 2009
Posts: 16
|
|
Asus Sabertooth Z77 + F3-17000CL9Q-16GBZH, Bios settings
Hello,
I'm trying to configure my new MB Asus Sabertooth Z77 (Update 1206 Done) with F3-17000CL9Q-16GBZH
My MB boots only with 8Go (DIMM A1+A2), I have tried to modify settings in UEFI Bios (XMP/Auto/Manual), Latency 9-11-10-28. But the PC don't boot in any configuration.
I have Red Light on MemTest... Ihave tested to do the MemTest with same problem.
I also swapped the memory, no problem on it
I think it's just a configuration problem in Bios. I have checked QVL before my purchase and everything should be ok, or I'm crazy
Could you help me please ?
Thanks a lot
Last edited by julienperret; 07-03-2012 at 12:35 PM.
|

07-03-2012, 01:53 PM
|
 |
Administrator
|
|
Join Date: Feb 2009
Posts: 14,820
|
|
Have you tried at 1600 or 1866, don't know why, but they show the mobo only rated to 1866 and many have had problems trying to run faster sticks on this particular mobo
__________________
Pls offer comments on support I provide, HERE, in order to help me do a better job here:
Tman
|

07-04-2012, 12:54 AM
|
|
Junior Member
|
|
Join Date: Dec 2009
Posts: 16
|
|
I tried this morning but same thing, what are other settings (XMP / ...) ?
Tks
|

07-04-2012, 06:33 AM
|
 |
Administrator
|
|
Join Date: Feb 2009
Posts: 14,820
|
|
Do you have the latest BIOS?
__________________
Pls offer comments on support I provide, HERE, in order to help me do a better job here:
Tman
|

07-04-2012, 06:37 AM
|
|
Junior Member
|
|
Join Date: Dec 2009
Posts: 16
|
|
Yes, just installed yesterday the 1206 version
|

07-04-2012, 06:49 AM
|
 |
Administrator
|
|
Join Date: Feb 2009
Posts: 14,820
|
|
Might try manually at 8-10-9-28 1866 (and may want to add + .05 to the DRAM voltage). I'd also check w/ Asus and see if they play to update for faster sticks
__________________
Pls offer comments on support I provide, HERE, in order to help me do a better job here:
Tman
|

07-04-2012, 09:56 AM
|
|
Junior Member
|
|
Join Date: Dec 2009
Posts: 16
|
|
Sorry, but I still have the same problem
Have you some settings with 1600 ?
For the + .05 to the DRAM I will have value 1.660, do you confirm ?
If you want I can open an Asus Support, just tell me
Thanks a lot
|

07-04-2012, 10:30 AM
|
 |
Administrator
|
|
Join Date: Feb 2009
Posts: 14,820
|
|
At 1600 I'd start with the same timings as I gave for 1866, but can prob try the DRAM voltage at 1.6 or even 1.55.....and it can't hurt to open a ticket w/ Asus, maybe they'll get to work on the BIOS if enough people complain...Of all the Z77 mobo out there (and this is expensive) the Sabertooth, I believe is the only one that's not rated for over 2000 DRAM, the far majority of mobos are rated like 2400 and up to 2800+
__________________
Pls offer comments on support I provide, HERE, in order to help me do a better job here:
Tman
|

07-11-2012, 06:45 AM
|
|
Junior Member
|
|
Join Date: Dec 2009
Posts: 16
|
|
I'd change the MOBO, it was a hardware problem
Everything's OK now in 1666 Mhz
Thanks
|

07-11-2012, 07:13 AM
|
 |
Administrator
|
|
Join Date: Feb 2009
Posts: 14,820
|
|
Glad to hear all is well, sometimes we just get a bad component here or there, it can be a pain, especially when mobo and CPU makers always seem to blame the DRAM
__________________
Pls offer comments on support I provide, HERE, in order to help me do a better job here:
Tman
|
| Thread Tools |
Search this Thread |
|
|
|
| Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -8. The time now is 04:20 PM.
|