Problem with Mixing F4-3200C16D-16GVKB and F4-3200C16D-16GVK kits

[John_M]

Problem with Mixing F4-3200C16D-16GVKB and F4-3200C16D-16GVK RAM kits
I bought a set of the F4-3200C16D-16GVK ram and installed it in an AS Rock Z-170 Pro4S MB. I could use the XMP-3200 option with no problem on the one kit. Liked the ram so much I decided to add 16G more, thought I had ordered the matching set but was shipped a F4-3200C16D-16GVKB memory kit.
New ram works fine on 2133 setting can’t get it to accept the XMP-3200 setting. I see the kits have different XMP timing profiles. Any way to make this work with what I have?
Specs
AS Rock Z-170 pro 4 s
I7- 6700k
32G G. Skill F-4 3200
SSD 960 Pro 512
SSD 850 EVO 500
WD Blue 2TB
WD Black 1TB
GTX 1070

[GSKILL TECH]

Set it to the higher numbers and see if they can work together. It may be best to start from a lower frequency first like 2800 then work your way up. Rather than using XMP, manually input basic RAM settings and let the motherboard detect the rest.

[John_M]

Thanks!

Thanks, I will try to set it manually. Overall very pleased with the ram. Should have ordered it all at once from one supplier.

Thanks,

John M

[John_M]

It seems that the different timing setting on XMP for each of these kits is confusing the MB. It keeps defaulting back to 2133. I set the bios to 3200 and when it boots it defaults to 2133. Possible to return one and get a matching set ?

Thanks,

John

[GSKILL TECH]

Contact the RMA dept. to see if they can arrange something

rma@gskillusa.com