G.SKILL TECH FORUM

Go Back   G.SKILL TECH FORUM ? General Discussion ? Overclocking ? Intel Socket LGA 2011, 2011-v3, 2066

Intel Socket LGA 2011, 2011-v3, 2066 Intel i7, Extreme Series CPUs ~ Intel X79, X99, X299 chip sets

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 04-02-2015, 10:03 PM
Larry L Larry L is offline
Junior Member
 
Join Date: May 2014
Posts: 11
Larry L is reading into overclocking
Default Memory 2133 Mhz BSOD B11OA Help Please

Very new at over clocking only OC 3 Mother Boards looking for some recommendations Please. Long post sorry. At 4.4 Ghz BCLK 100 Multiplier 44 Per Core all settings default V-Core 1.245v Off Set + 0.05v No BSOD or issues.

Issue with 4.5 V-Core 1.30v, or 4.6 GHz V Core 1.35v. LLC Auto or Ultra High at 140 Percent. On any other LLC settings.
BSOD B110A

Mother Board Asus Rampage 4 Black Edition
CPU: I 7 4930K at 4.5Ghz V-Core 1.30v
Heat Sink NH-D-14
LLC Ultra High at 140 Percent Seems High
V-Core 1.30v
Off Set + 0.50v Seems High
Memory G-Skill
F3-17000CL9Q-16GBZH
Series RipjawsZ
Memory Type DDR3
Capacity 16GB (4GBx4)
Multi-Channel Kit Quad Channel Kit
Tested Speed 2133MHz
Tested Latency 9-11-10-28-2N
Tested Voltage 1.65v
Registered/Unbuffered Unbuffered
Error Checking Non-ECC
SPD Speed 1600MHz
SPD Voltage 1.50v
Fan lncluded No
height 40 mm / 1.58 inch
Warranty Lifetime
Features Intel XMP (Extreme Memory Profile) Ready

At 4.5 Ghz with 2133 Mhz Mem I get a BSOD with a B110A
I think indicates a weak IMC on the CPU?

Is this correct?
VTT is used for Internal communications to the Chip Set.
VCCSA voltage basically talks to the memory controller.

Can I do this to the memory kit F3-17000CL9Q-16GBZH is 2133 MHz 16 Gb Kit
to lower the stress on the IMC. Appears have 2 options run 8 GBs of 2133 or 16 Gb at 1600 Mhz? Unless I am missing other settings could be adjusted?

F3-12800CL8Q-16GBZH
Series RipjawsZ
Memory Type DDR3
Capacity 16GB (4GBx4)
Multi-Channel Kit Quad Channel Kit
Tested Speed 1600MHz
Tested Latency 8-8-8-24-2N
Tested Voltage 1.50v
Registered/Unbuffered Unbuffered
Error Checking Non-ECC
SPD Speed 1600MHz
SPD Voltage 1.50v
Fan lncluded No
height 40 mm / 1.58 inch
Warranty Lifetime
Features Intel XMP (Extreme Memory Profile) Ready
Reply With Quote
  #2  
Old 04-04-2015, 07:17 PM
Larry L Larry L is offline
Junior Member
 
Join Date: May 2014
Posts: 11
Larry L is reading into overclocking
Default

With Core Voltage on Normal (Not Off Set) can use Load Line Calibration at 120 Percent Normal and no BSOD codes.

Last edited by Larry L; 04-04-2015 at 07:23 PM.
Reply With Quote
  #3  
Old 04-08-2015, 03:40 PM
GSKILL TECH's Avatar
GSKILL TECH GSKILL TECH is offline
Administrator
 
Join Date: Jul 2008
Location: Los Angeles, California
Posts: 12,956
GSKILL TECH has disabled reputation
Default

LLC does not need to be Ultra for ~4.5GHz

IMC should be OK, I think the issue is stable Voltage for CPU.
__________________
Are you an overclocker? Have screen shots of your OC results? Please post and share your OC experience!

The new G.Skill Overclocking Section!

http://www.gskill.us/forum/forumdisplay.php?f=43
Reply With Quote
  #4  
Old 04-10-2015, 09:54 PM
Larry L Larry L is offline
Junior Member
 
Join Date: May 2014
Posts: 11
Larry L is reading into overclocking
Default

Changed the LLC from Ultra High to Medium at 120 Percent. Recommended maximum for 4.45 GHz.

Per the guide listed here Thank You
Reply With Quote
Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -8. The time now is 10:45 AM.


Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
All rights reserved. Copyright 1989-2013, G.Skill International Enterprise