Announcement

Collapse
No announcement yet.

Problem with Phoenix Pro sata2 240 gb. No respond after around 5 min.

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Problem with Phoenix Pro sata2 240 gb. No respond after around 5 min.

    I'm sorry with my english.



    1. I tried to up date fw 4.0a 4.2a but still same problem
    2. I tried to install with another computer but doesn't work same problem
    3. I tried to put in the external box. after 3-5 min . same problem
    4. I dont know what to do. i bought ssd form someone but i forgot. It's still have warranty
    5. It's like disconnect from my computer after that i shut down and turn it on
    it's work again but no longer 5 minute. Alway the same.

    i'm from thailand.

    Please give an advise

    Thank you so much

    Sorry again with my english

  • #2
    Do you have the latest BIOS, did you set it up in the BIOS with AHCI, do you have the latest AHCI drivers loaded in the system, did you format it with your system - there's also the possibility that whoever you bought it from knew it was damaged/dying


    Pls offer comments on support I provide, HERE, in order to help me do a better job here:

    Tman

    Comment


    • #3
      i already set to AHCI Mode and format many time with my system.

      Thank you

      Comment


      • #4
        Anyone help plz

        Comment


        • #5
          Hi,

          try with re-install the firmware(latest 4.2 with AHCI), it could help!

          Comment

          Working...
          X