Announcement

Collapse
No announcement yet.

Asus Z170 Pro Gaming G.Skill F4-3600C17D-16GVK

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Asus Z170 Pro Gaming G.Skill F4-3600C17D-16GVK

    Hi,
    Memory not work on the motherboard Asus Z170 Pro Gaming
    I am trying to run F4-3600C17D-16GVK memory at a frequency of 3600MHz. (using xmp profile).
    Nothing happens.
    The processor i7 6700K.
    Can someone help?
    Thank you in advance.

  • #2
    The general consensus seems to be that the 4 layer PCB models, the z170 pro gaming is probably one of them, are unable to handle DDR4-3200+ reliably without excessive volts for VCCSA/VCCIO or at all. To quote Raja@ASUS on that:
    The Z170-A is a 4 layer board. These boards needs a lot of Sa voltage to run speeds over ddr4-3000 and it is conditional.
    Link: http://www.overclock.net/t/1568154/a...#post_24629290
    Team HardwareLUXX | Show off your G.SKILL products!

    Comment


    • #3
      3600 will work ,was able to run these :
      G.SKILL Ripjaws V Series 16GB (4 x 4GB) 288-Pin DDR4 SDRAM DDR4 3600 (PC4 28800) Desktop Memory Model F4-3600C17Q-16GVK
      on a Z170 Pro mobo with an I7 -6700K with a slight OC of 4.5 Ghz , went into bios dropped oc on cpu to stock ,set XMP in bios , set dram voltage manually , rebooted - all good , rebooted set OC to 4.5 Ghz - all good, when i went to 4.6 or better i would have problems with the mem controller( some times it would boot to windows some times not ) unless I added voltage , which i did not want to do 24/7 , so left the cpu @ 4.5 Ghz - was stable and ran very well in fact.
      Hope this info helps
      Last edited by cabledog2tuff4u; 07-06-2021, 06:05 PM.

      Comment

      Working...
      X