Announcement

Collapse
No announcement yet.

Help OC'ing F4-3200C16Q-32GVK

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Help OC'ing F4-3200C16Q-32GVK

    I cant seem to get the system to boot if I enable the XMP profile. Can someone provide me with the memory settings needed to do some mild OC'ing of my new system.

    Details are below.

    MB - EVGA Z170 Classified K bios 1.04
    CPU - Core i7 - 6700K@ 4.0GHZ
    Memory - 32G Ripjaw V series DDR4 3200

    I'd like to start with a mild OC and then start pushing the system to see where I can get. I am water cooling the CPU so I can push it a decent amount.

    Any help would be greatly appreciated.

  • #2
    Do you have the latest BIOS?

    Which slots are they installed in?

    Test one module at a time to see if each can boot

    Comment


    • #3
      Originally posted by GSKILL TECH View Post
      Do you have the latest BIOS?

      Which slots are they installed in?

      Test one module at a time to see if each can boot
      Yes, newest BIOS

      All 4 slots, 4 x 8gig

      Done and still have the same issue. Thinking I need to set things manually but not sure about recommended settings as far as clocks and voltages.

      Comment


      • #4
        So each stick works fine at 3200?

        Recommended settings are on the RAM, manually input those and the rest should AUTO detect.

        Comment

        Working...
        X