Announcement

Collapse
No announcement yet.

Tighten GSkill TridentZ RGB F4-3600C16D-16GTZR

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Tighten GSkill TridentZ RGB F4-3600C16D-16GTZR

    I have GSkill TridentZ RGB F4-3600C16D-16GTZR tightened to 14-14-14-34 T1 and would like to try some tight settings on the secondaries..So far I have TRFC down to 300 from 535,and TREFI was on Auto at 11400 x3 and now at 34200..Are there any other secondary ones I should focus on to tighten up..I was told at another site that TRTP, TRRD, TFAW, TCWL are good ones to start..Are there any others that are worth tightening..

  • #2
    Maybe Write Latency, but everything else may not affect much, if at all

    Comment


    • #3
      You might see bigger performance gains from tightening the tertiaries, esp if your board failed to properly train them.
      Team HardwareLUXX | Show off your G.SKILL products!

      Comment


      • #4
        Thanks for the info..Here are my bios memory settings.Is there anything here you would recommend I should try..
        Attached Files

        Comment


        • #5
          Most things from XA's guide are still valid: http://forum.hwbot.org/showthread.php?t=161483
          Team HardwareLUXX | Show off your G.SKILL products!

          Comment

          Working...
          X