G.SKILL TECH FORUM

Go Back   G.SKILL TECH FORUM ? Product Discussion ? SSD

SSD Problem or question about your SSD? Post a thread in here

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 06-18-2017, 06:25 PM
paakmaan paakmaan is offline
Junior Member
 
Join Date: Mar 2015
Posts: 2
paakmaan is reading into overclocking
Default Windows 10, version 1703

Windows 10, version 1703
Failed to install.

Cause on the BSOD: bldrv1241.sys

Any new Windows 10 drivers coming soon?

Phoenix Blade 480GB

Last edited by paakmaan; 06-18-2017 at 06:31 PM. Reason: Identity Product
Reply With Quote
  #2  
Old 06-21-2017, 09:22 AM
GSKILL TECH's Avatar
GSKILL TECH GSKILL TECH is offline
Administrator
 
Join Date: Jul 2008
Location: Los Angeles, California
Posts: 13,000
GSKILL TECH has disabled reputation
Default

No, unfortunately we will not be releasing new drivers for that drive.

Have you installed OS on that drive before? Are you attempting to install the driver when that error happens?
__________________
Are you an overclocker? Have screen shots of your OC results? Please post and share your OC experience!

The new G.Skill Overclocking Section!

http://www.gskill.us/forum/forumdisplay.php?f=43
Reply With Quote
  #3  
Old 06-21-2017, 07:45 PM
paakmaan paakmaan is offline
Junior Member
 
Join Date: Mar 2015
Posts: 2
paakmaan is reading into overclocking
Default

I installed Windows 10 Pro 64 bit when the free upgrade was offered about a 18 months ago from Windows 7.1 Pro 64 bit. There was no problems then.

The Microsoft creators update take about 30 minutes to install, then reboots. It reboots 3 times and identifies bldrv1241.sys failed as the stop code. SYSTEM THREAD EXCEPTION NOT HANDLED.

Sort of disappointing that there is no future for this product.

I can certainly will say that this SDD "F*CKING ROCKS!"

But now I feel ripped off.

But life goes on.....
Reply With Quote
  #4  
Old 08-03-2017, 01:41 AM
G.SKILL's Avatar
G.SKILL G.SKILL is offline
Administrator
 
Join Date: Jul 2008
Location: Taipei, Taiwan
Posts: 3,451
G.SKILL has disabled reputation
Default

Hi paakmaan,

After some extensive testing, we've found a way for you to continue using the Phoenix Blade PCIe SSD under the latest Windows 10 update.

You will need the “Phoenix Blade PCIe SSD Driver r2321 (Windows 7, 8, 8.1)” from our product webpage. The download link is here:

http://www.gskill.com/Download/Drive...iver_r2321.zip

1. Remove Phoenix Blade from the PCIe slot on the motherboard.
2. This should allow you to boot into Windows 10 Build 1703 with latest updates, if the PCIe SSD prevented you from booting into Windows before.
3. After going into Windows, navigate to C:\Windows\System32\drivers
4. Look for a file called “bldrv1241.sys” and delete it
5. Shut down the system
6. Install Phoenix Blade PCIe SSD back into the PCIe slot. Without the problematic driver, it should boot into Windows.
7. Go to Device Manager, and look under “Storage controllers”. If it says “G.SKILL Phoenix Blade Controller” or “Comay SBC208 SCSI Controller” or anything similar to the ones above, right click on it and choose “Uninstall device”, and make sure to click the checkbox for “Delete the driver software for this device.” Wait for it to uninstall/delete, then right click and choose to “Scan for hardware changes”. Repeat this step #7 until you see an unrecognized device under “Other devices > Mass Storage Controller”.
8. Right click the unrecognized “Mass Storage Controller” and choose to “Update driver”, then choose the bottom option to “Browse my computer for driver software”, and in the dialogue, navigate to the extracted downloaded folder %PhoenixBladeDriver_r2321%/Windows Pre-Install Drivers/win7_2008”. After selecting the “win7_2008” folder, click “OK” to install the Windows 7 driver.
9. After installing the Windows 7 driver, reboot the system, and your Phoenix Blade PCIe SSD drive should be recognized now under the latest Windows Update on Windows 10.
Reply With Quote
  #5  
Old 08-30-2017, 05:42 PM
Djef Djef is offline
Junior Member
 
Join Date: Jul 2017
Posts: 1
Djef is reading into overclocking
Default

LOL, we bought a pcie SSD and we don't use it as main drive,
off course we prefer a old sata3 for boot device....
is it a joke ??
exuse me but these solution is just stupid...

1k€ to be ****ed with this drive so cool : Gskil is forever banned of my wichlist
/clap
Reply With Quote
Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -8. The time now is 07:14 AM.


Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
All rights reserved. Copyright 1989-2013, G.Skill International Enterprise