Forgive me if this has already been answered, I searched the forums and tried the settings in the sticky but still haven't been able to figure it out. So here's the deal:
I have 4x2GB sticks of the RAM mentioned in the title. Everything seems to run fine if I install two sticks in slots 1 and 3 (DDR3_1 and DDR3_3) which according to the manual is Channel_0. I've tested all four sticks in this manner and they work fine. However, when I populate all four slots and fire it up, I get no POST, only some long beeps. Most of my settings are on auto. Are there some settings I should be adjusting to get all four sticks to work?
Thanks in advance!
I have 4x2GB sticks of the RAM mentioned in the title. Everything seems to run fine if I install two sticks in slots 1 and 3 (DDR3_1 and DDR3_3) which according to the manual is Channel_0. I've tested all four sticks in this manner and they work fine. However, when I populate all four slots and fire it up, I get no POST, only some long beeps. Most of my settings are on auto. Are there some settings I should be adjusting to get all four sticks to work?
Thanks in advance!
Comment