G.SKILL TECH FORUM

Go Back   G.SKILL TECH FORUM ? Product Discussion ? SSD

SSD Problem or question about your SSD? Post a thread in here

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 11-10-2015, 12:07 PM
SeldomSeen SeldomSeen is offline
Junior Member
 
Join Date: Nov 2015
Posts: 1
SeldomSeen is reading into overclocking
Default Phoenix Blade Windows 10 install problems - Solved

I wanted to share my experiences of upgrading to W10 on a system with a C drive Phoenixblade.

The system is an old Gigabyte X58/990X Gulftown with HD5870, used for miscellaneous support work and some video editing, and had been running a fully patched W7 pro.

Initially the W10 upgrade seemed to be going ok, until the system attempted to reboot about 65% through the install. No error messages, just a blank screen and no further progress, or the light blue 4 square blobs and an ever spinning circle of dots. (The installer would eventually roll back to W7).

To overcome this I imaged the data from the Phoenixblade onto a backup disc (256 GB Samsung 840 pro) using Casper 8.0.

The W10 upgrade ran without issues on the 840 pro, and I imaged the upgraded disc back onto the Phoenixblade.

W10 on the Phoenixblade has been running without problems since.

Good luck with your upgrades.
Reply With Quote
Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -8. The time now is 08:41 PM.


Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
All rights reserved. Copyright 1989-2013, G.Skill International Enterprise