G.SKILL TECH FORUM

Go Back   G.SKILL TECH FORUM ? Product Discussion ? SSD

SSD Problem or question about your SSD? Post a thread in here

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 03-24-2009, 10:07 AM
GSKILL TECH's Avatar
GSKILL TECH GSKILL TECH is offline
Administrator
 
Join Date: Jul 2008
Location: Los Angeles, California
Posts: 12,993
GSKILL TECH has disabled reputation
Default Change Windows registy to improve your SSD performance

Good for both XP and Vista, but mostly for XP

1st, Please format your SSD with 4k or 8k block size. Smaller block size can increase the performance of the SSD

For Vista, please make sure you disable superfetch
Control Panel -> Performance and maintenance-> Administrative tools-> Service -> Superfetch -> Startup type “Disable”-> ok


Registry Tweaks
to start regedit
Start->run-> type in "regedit"


Disable Automatic Boot Disk Optimization

Registry Key: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Dfrg\BootOpt imizeFunction

Modify or Make a new String value
Name = Enable, Type = String Value, change value to N


Last Access Time Stamps

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Filesystem

Modify or Make a new DWORD Value
Name = NtfsDisableLastAccessUpdate Type = DWORD Value, change value to 1


Prevent windows to move operating data on virtual memory

By default, windows do periodically checks to move its essential driver and kernel files to the virtual memory ( page file ).


HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\Se ssion Manager\Memory Management.
Select the DisablePagingExecutive value to '1'



Enable write caching on hard disks

Enabling hard drive write caching will make transferring of data between hard drives and memory more efficient. If you have a hot-swappable drive rack, or if you expect your PC to be shut down incorrectly, don't enable it.

To enable write caching right click on my computer and select 'properties.'

Select the hardware tab, then 'device manager.' From the device manager window, expand 'disk drives' and highlight your hard disk. Select 'properties' then the 'policies' tab.

Check the 'enable write caching on the disk' box.

Repeat the above steps for all hard drives in your system.


Install Windows SteadyState 2.5 <-------------- i don't really recommend it. some ppl think it is good, some ppl don't like it at all.

http://www.microsoft.com/downloads/d...displaylang=en

After installation, turn on Windows Disk Protection and change the protection level to “Retain all changes permanently”. Please remember change the cache file around 10GB.

It coverts random write to sequential write. but make sure you have enough space for cache to prevent many windows restarting.

reboot after you change it



The tweaks above work very well (tested numerous times). If you are looking for registry tweaks, those two are the one you have to change.
Reply With Quote
  #2  
Old 05-12-2009, 01:19 PM
Schwanke78 Schwanke78 is offline
Member
 
Join Date: May 2009
Location: Tampa FL
Posts: 76
Schwanke78 is reading into overclocking
Default

Good read thanks for posting, keep the great material and tweaks coming!
__________________
CPU I7-980X @ 3.81Ghz
MB ASUS P6X58D-E
GPU GTX480 @ 770Mhz
RAM 12Gb Patriot Viper Xtreme Division-2 DDR3 @ 1908Mhz
PSU Corsair AX 850W
SSD: Intel X25M 80Gb
HD 2x WD VelociRaptors 150Gb in Raid-0

Sager NP8662
CPU: Intel Q9100 @ 2.38 GHz
GPU: GTX 260M @ 612Mhz
RAM: G.Skill DDR3 1066Mhz 4Gb
SSD: Intel X25M 120Gb
Reply With Quote
  #3  
Old 01-18-2010, 09:44 PM
Masika Masika is offline
Junior Member
 
Join Date: Oct 2009
Posts: 26
Masika is reading into overclocking
Default

This commands work of WIN7?
Reply With Quote
  #4  
Old 01-25-2010, 05:21 AM
monographix monographix is offline
Junior Member
 
Join Date: Dec 2009
Posts: 18
monographix is reading into overclocking
Default and for Win 7?

Quote:
Originally Posted by Masika View Post
This commands work of WIN7?
do they ? ....
Reply With Quote
  #5  
Old 01-26-2010, 07:32 PM
TwoCables TwoCables is offline
Senior Member
 
Join Date: Aug 2009
Location: St. Paul, Minnesota
Posts: 106
TwoCables is reading into overclocking
Default

Try them to find out. No harm will be done if they don't apply.
Reply With Quote
  #6  
Old 08-03-2010, 07:31 AM
gingerbee gingerbee is offline
Member
 
Join Date: Sep 2009
Posts: 42
gingerbee is reading into overclocking
Default

pointless for 7 all you need is this http://www.mydellmini.com/forum/wind...ed-tweaks.html

oh and now you have to image verifi just to post. Weak
moving user profiles or app install is pointless cause most of the apps you want to run fast are now limited buy hdd kinda defeats the purpose of an ssd

Last edited by gingerbee; 08-03-2010 at 07:33 AM.
Reply With Quote
  #7  
Old 08-07-2010, 08:23 AM
naveed naveed is offline
Junior Member
 
Join Date: Apr 2010
Posts: 2
naveed is reading into overclocking
Default Gr8888

Gr888 Tips.. let me try
Reply With Quote
  #8  
Old 05-14-2011, 08:59 PM
xSephirothGx xSephirothGx is offline
Member
 
Join Date: Aug 2010
Posts: 50
xSephirothGx is reading into overclocking
Default

About superfetch should i disable it or make it cache boot files only?
I already set my superfetch and readyboot disable, i notice ready boot writes alot & I only ask this because i read some tweaks that says don't disable superfetch because it will make a busy machine slowdown and the only benefit you can get on disabling superfetch is disk space.
Reply With Quote
Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -8. The time now is 11:18 PM.


Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
All rights reserved. Copyright 1989-2013, G.Skill International Enterprise