G.SKILL TECH FORUM

Go Back   G.SKILL TECH FORUM ? Product Discussion ? SSD

SSD Problem or question about your SSD? Post a thread in here

Closed Thread
 
Thread Tools Search this Thread Display Modes
  #1  
Old 09-17-2010, 02:07 AM
G.SKILL's Avatar
G.SKILL G.SKILL is offline
Administrator
 
Join Date: Jul 2008
Location: Taipei, Taiwan
Posts: 3,448
G.SKILL has disabled reputation
Default [Only for Falcon II] firmware 2030 released

Dear Customers,

Here comes the Falcon II new firmware Rev. 2030.

Quote:
──Change Note──
Feature Add: User data scrambling capability was added.
Bug Fix: More read fail scenarios were added to firmware bad block management.
Bug Fix: ATA Security bug fixes.
Other: For sleep/standby command, idle time garbage collection is better to be not started.

Caution!!
Before upgrading new firmware please backup your data of target SSD.
After upgrading your SSD will be wiped and all data will be destroyed!!


Note:
1. Please set SATA as IDE mode in BIOS first before upgrading new firmware
2. The target SSD could not be an OS drive. Your should boot from the other drive.




Upgrade Procedure:

1. Download and extract the firmware files.


2. Select the proper file which is correspondent with the capacity of your target SSD and right-click then choose "Run as administrator".



3. It display some notes and the drive list it detect.



4. Carefully check the correct target SSD and keyin its number then press enter.

Last edited by vaca; 09-19-2010 at 06:31 PM.
  #2  
Old 09-17-2010, 02:13 AM
G.SKILL's Avatar
G.SKILL G.SKILL is offline
Administrator
 
Join Date: Jul 2008
Location: Taipei, Taiwan
Posts: 3,448
G.SKILL has disabled reputation
Default

5. It warn that the upgrading will erase all data on the target drive. Press y and enter to continue.



6. If upgrade successfully finished, the result would told on the prompt.
Now you accomplish the mission.



7. If you get error message below please try the other file in step 2.





Download Frimware 2030
Closed Thread

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -8. The time now is 08:36 PM.


Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
All rights reserved. Copyright 1989-2013, G.Skill International Enterprise