Disable CPU Feature +250mv 2.290v 444x9 5 6 6 18 droop disable 3 3 1 norma normal more relax more relax more relax
Announcement
Collapse
No announcement yet.
What's F2-8500CL5D-4GBPQ DDR2 1066 safe voltage?
Collapse
X
-
T2 Dispatchisable for RAM overclock stable Flex Memory Mode:Auto for dual channel,CPU 416x9 for RAM DDR2 999
CPU Feature
Thermal Management Control:Enable
PPM(EIST) Mode:Enable
Limit CPUID MaxValisable
C1E Function:Auto
Execute Disable Bit:Enable
Virtualization Technology:Enable
Core Multi-Processing:Enable
Voltage Setting
CPU VID Special Add:+100mv
DRAM Voltage Control:2.100V
SB Core/CPU PLL Voltage:1.55V
NB Core Voltage:1.27V
CPU VTT Voltage:1.24V
Vcore Droop Control:Enable
Clockgen Voltage Control:3.45V
CPU GTL 0/2 REF Volt:0.67X
CPU GTL 1/3 REF Volt:0.67X
North Bridge GTL REF Volt:0.67X
FSB Vref:Auto
Genie BIOS Setting
CPU Clock Amplitude:800mv
CPU CLock Ratio:9x
CPU Clock:416 MHz
Target CPU Clock:3744 MHz
DRAM Speed:Auto
Target DRAM SpeedDR2 999
DRAM Timing
Enhance Data Transmitting:Fast
Enhance Addressing:Fast
T2 Dispatchisable
Flex Memory Mode:Auto
CAS Latency Time (tCL):5
RAS# to CAS# Delay (tRCD):5
RAS# Precharge (tRP):5
Precharge Delay (tRAS):15
All Precharge to ACT:5
REF to ACT Delay (tRFC):55
Performance LVL(Read delay):Auto
Read delay phase adjust:Auto
Write to PRE Delay(tWR):Auto
Rank Write to Read(tWRT):Auto
ACT to ACT Delay(tRRD):Auto
Read To Write delay(tRDWR):Auto
Ranks Write to Write(tWRWR):Auto
Ranks Write To Read(tWRRD):Auto
Read CAS# Precharge(tRTP):Auto
All PRE to Refresh:10
Clock Setting Fin Delay
DLL and RCOMP Settings:By Menu
CH1 DRAM Default Skew:Model 0
CH1 DRAM Default Skew:Model 0
RCOMP Setting:Model 0
Ch1 Clock Crossing Setting:Nominal
Ch2 Clock Crossing Setting:Nominal
Ch1Ch2 CommonClock Setting:NominalLast edited by cuthead; 12-05-2015, 10:37 AM.
Comment
Comment