Announcement

Collapse
No announcement yet.

Trident Z XMP problems :(

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Trident Z XMP problems :(

    Hi
    I recently bought a Trident Z RGB 3200 C16 2x8GB ram kit
    But can't get it to run at that speed using XMP it won't go abouve 2133mhz
    I have also tried setting the timmings but that also fails.
    Any ideas or are these sticks dead


    My comp specs are:
    i7 6700K
    MSi Z170 Krait Gaming - Lastest Bios
    Trident Z 3200 C16 2x8GB ram kit
    Last edited by Mrdark; 04-24-2017, 12:33 PM.

  • #2
    Which slots do you have the RAM installed in?

    Try one module at a time to see if a stick performs better than the other.

    Comment


    • #3
      I have them in slots 1 and 3 as normal
      I have also tried running one module at a time but they still fail at rated speed

      Comment


      • #4
        They should be in second and fourth slots away from CPU.

        Comment


        • #5
          Originally posted by Mrdark View Post
          I have them in slots 1 and 3 as normal
          I have also tried running one module at a time but they still fail at rated speed
          Any update on this Mrdark? Please post to aid other readers if they are having the same issue.

          Comment

          Working...
          X