G.SKILL TECH FORUM

Go Back   G.SKILL TECH FORUM ? Product Discussion ? DDR3 ? BIOS Configuration for INTEL Motherboards

BIOS Configuration for INTEL Motherboards Discuss BIOS/EFI Configuration for specific INTEL motherboards

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 03-31-2017, 06:09 AM
baboon baboon is offline
Junior Member
 
Join Date: Mar 2017
Posts: 3
baboon is reading into overclocking
Post F3-10666CL9D-8GBXL + MSI P55-GD55 + I3 540 @ 3.07GHz

MSI P55-GD55
I3 540 @3.07 GHz
OLD RAM: Corsaire TR3X3G1333C9 1,50v
NEW RAM: Gskill F3-10666CL9D-8GBXL 1,50v

Hello

Recently bought a pair of ram F3-12800CL9D-8GBXM. i Can't run them with my motherboard. I had contacted the support gskill which tells me that these rams are incompatible with my processor because low voltage 1.35v and xmp even i could see it in the bios.

I asked to my reseller for an exchange with the model F3-10666CL9D-8GBXL that the Gkill support recommendedand that was marked compatible on the gskill website with my motherboard MSI P55-GD55.

To my great surprize it still does not work same problem that i had with F3-12800CL9D-8GBXM. I reset the cmos, i try different configuration in the bios and nothing does.

I can enter in the bios only in single channel, dual channel , does not go until bios. I tested each stick of ram with memtest and none stick exceeded 11% of the test and the pc freeze. Windows wont start and Debian Linux Freeze when i exeed 1024Mb usage of ram.

When I return to my old sticks all work, Memtest, Debian and Windows.

Can you help me?

Thanks in advance and sorry for my bad english i hope you can understand

Regards

Last edited by baboon; 03-31-2017 at 06:19 AM.
Reply With Quote
  #2  
Old 03-31-2017, 10:31 AM
GSKILL TECH's Avatar
GSKILL TECH GSKILL TECH is offline
Administrator
 
Join Date: Jul 2008
Location: Los Angeles, California
Posts: 13,054
GSKILL TECH has disabled reputation
Default

P55 requires double sided memory chips

This kit is guaranteed double sided:

F3-10666CL9D-8GBNT
__________________
Are you an overclocker? Have screen shots of your OC results? Please post and share your OC experience!

The new G.Skill Overclocking Section!

http://www.gskill.us/forum/forumdisplay.php?f=43
Reply With Quote
  #3  
Old 03-31-2017, 12:27 PM
baboon baboon is offline
Junior Member
 
Join Date: Mar 2017
Posts: 3
baboon is reading into overclocking
Default

Hello And thanks

But why it's compatible in gskill ram configurator and finally not?

Regards
Reply With Quote
  #4  
Old 03-31-2017, 02:36 PM
GSKILL TECH's Avatar
GSKILL TECH GSKILL TECH is offline
Administrator
 
Join Date: Jul 2008
Location: Los Angeles, California
Posts: 13,054
GSKILL TECH has disabled reputation
Default

Chips have changed over time. Most 4GB modules are no longer double sided due to manufacturing improvement.
__________________
Are you an overclocker? Have screen shots of your OC results? Please post and share your OC experience!

The new G.Skill Overclocking Section!

http://www.gskill.us/forum/forumdisplay.php?f=43
Reply With Quote
  #5  
Old 04-14-2017, 03:03 AM
baboon baboon is offline
Junior Member
 
Join Date: Mar 2017
Posts: 3
baboon is reading into overclocking
Default

Hello and thanks

I had understand for NT Series, is it the same for NS?

My reseller is agree for a last exchange. He have in stock with a different ref that F3-10666CL9D-8GBNT, he have:

F3-10600CL9D-8GBNT

F3-1333C9D-8GNS

One of these is compatible, NS ? What is the best for my mother board and my cpu.

Thx in advance
Reply With Quote
  #6  
Old 04-18-2017, 08:18 AM
GSKILL TECH's Avatar
GSKILL TECH GSKILL TECH is offline
Administrator
 
Join Date: Jul 2008
Location: Los Angeles, California
Posts: 13,054
GSKILL TECH has disabled reputation
Default

NS is single side

You need NT
__________________
Are you an overclocker? Have screen shots of your OC results? Please post and share your OC experience!

The new G.Skill Overclocking Section!

http://www.gskill.us/forum/forumdisplay.php?f=43
Reply With Quote
Reply

Bookmarks

Tags
p55-gd55

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -8. The time now is 04:29 PM.


Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
All rights reserved. Copyright 1989-2018, G.Skill International Enterprise