Hi. System as follows:
Asrock Z77 Extreme 4 bios 2.80
Intel 3770K overcklocked to 4.6Ghz vcore 1.28
Trident X 2400 2x4gb 10-12-12-31 1.65v vtt 1.13
Need some advice please. Can run this mem at 2200 10-12-12-36 1.65v with everything else on auto and is Prime stable all day long. When I change to XMP will not boot. I saw other advice to increse vtt so I bumped it to 1.13 and it boots and completes a full pass in memtest without errors. Boots into windows, but in Prime 2 workers stop within 20 seconds. Any idea where to go from here? I have custom water cooling of my cpu so I am managing heat although Intel's choice of using damned paste instead of solder for the heatspreader is making my temps higher than they should be and I don't yet have the guts to de-lid it. Thanks!
Asrock Z77 Extreme 4 bios 2.80
Intel 3770K overcklocked to 4.6Ghz vcore 1.28
Trident X 2400 2x4gb 10-12-12-31 1.65v vtt 1.13
Need some advice please. Can run this mem at 2200 10-12-12-36 1.65v with everything else on auto and is Prime stable all day long. When I change to XMP will not boot. I saw other advice to increse vtt so I bumped it to 1.13 and it boots and completes a full pass in memtest without errors. Boots into windows, but in Prime 2 workers stop within 20 seconds. Any idea where to go from here? I have custom water cooling of my cpu so I am managing heat although Intel's choice of using damned paste instead of solder for the heatspreader is making my temps higher than they should be and I don't yet have the guts to de-lid it. Thanks!
Comment