Just built new pc with A88S-PRO M/B with two sticks of 4g G Skill Ripjaws memory DDR3 1333 & AMD processor A6 6400K. Win 7 Prof. 64bit is installed. I have 2 sticks 4g each total 8g installed. I can only get it to read 1 stick of memory.
This is dual channel memory G.Skill DDR3-1333 PC3-10666....... #F3-10666CL9D-8GBRL
I loaded Bios optimized defaults with the same results.
Both sticks will read when installed individually in slots 1 or 2
Both sticks are read 8G when installed in slots 1 and 2. .(This is not recommended by ASUS. They recommend slots 2 & 4 .
Neither stick is read when installed in slots 3 or 4 together or separately.
Seems like slots 3 & 4 are dead. Nothing reads in them. Talked to Asus and they said bad M/B so I returned to place of purchase and got a new one from a totally different run 10k boards later. Still got same problem.
This is dual channel memory G.Skill DDR3-1333 PC3-10666....... #F3-10666CL9D-8GBRL
I loaded Bios optimized defaults with the same results.
Both sticks will read when installed individually in slots 1 or 2
Both sticks are read 8G when installed in slots 1 and 2. .(This is not recommended by ASUS. They recommend slots 2 & 4 .
Neither stick is read when installed in slots 3 or 4 together or separately.
Seems like slots 3 & 4 are dead. Nothing reads in them. Talked to Asus and they said bad M/B so I returned to place of purchase and got a new one from a totally different run 10k boards later. Still got same problem.
Comment