G.SKILL TECH FORUM

Go Back   G.SKILL TECH FORUM ? Product Discussion ? DDR3 ? BIOS Configuration for AMD Motherboards

BIOS Configuration for AMD Motherboards Discuss BIOS/EFI Configuration for specific AMD motherboards

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 12-02-2016, 06:46 PM
Mudafugas Mudafugas is offline
Junior Member
 
Join Date: Jan 2012
Posts: 8
Mudafugas is getting a feel for overclocking
Default Ausu 990fx r3.0 fx 8350,$gskill ram issues

id like to say I have done the fallowing set up with this build set up

MB; AUSU SABERTOOTH 990FX R3.0

CPU; AMD FX 8350 BE

GPU; FXF RX 480 8GB

RAM;G SKILL RIPJAWS F3-14900CL9D-8GBXL
DDR3-1866 CL9-10-9-28 1.5V
XMP PC3-1400 4GBX2

DONE THE FALLOWING

[FX or A Series CPU]

Method 1.

A. Enable DOCP/EOCP in BIOS.
a. If unstable, raise CPU-NB Voltage in addition to the above.

B. Set CPU-NB Voltage +0.05V to +0.1V depending on stability

C. F10, save, exit, and everything should be ready to go.


Method 2.

A. Set DRAM Frequency to DDR3-1866

B. Set DRAM Timings to tCL - tRCD - tRP - tRAS - Command Rate
(that the memory is rated for)

C. Set DRAM Voltage to what the memory is rated for.
(Manually set even if default 1.50V)

D. Set CPU-NB Voltage +0.05V to +0.1V depending on stability

E. F10, save, exit, and everything should be ready to go.

on that note my ram is running @ a freq of 936.15 but with windows memory issues

Last edited by Mudafugas; 12-06-2016 at 07:15 AM.
Reply With Quote
  #2  
Old 12-02-2016, 09:14 PM
Mudafugas Mudafugas is offline
Junior Member
 
Join Date: Jan 2012
Posts: 8
Mudafugas is getting a feel for overclocking
Default

thought i could run my current ram @ 1800 same timings i suppose not


http://dlcdnet.asus.com/pub/ASUS/mb/...419.1480659055

Last edited by Mudafugas; 12-02-2016 at 10:28 PM.
Reply With Quote
  #3  
Old 12-05-2016, 02:55 PM
GSKILL TECH's Avatar
GSKILL TECH GSKILL TECH is offline
Administrator
 
Join Date: Jul 2008
Location: Los Angeles, California
Posts: 13,005
GSKILL TECH has disabled reputation
Default

936 x 2 = DDR3-1872

DDR is double data rate so real frequency in MHz * 2 is the effective DDR frequency.
__________________
Are you an overclocker? Have screen shots of your OC results? Please post and share your OC experience!

The new G.Skill Overclocking Section!

http://www.gskill.us/forum/forumdisplay.php?f=43
Reply With Quote
  #4  
Old 12-06-2016, 07:11 AM
Mudafugas Mudafugas is offline
Junior Member
 
Join Date: Jan 2012
Posts: 8
Mudafugas is getting a feel for overclocking
Default

ok so there is a xmp profile for the fallowing ram RAM;G SKILL RIPJAWS F3-14900CL9D-8GBXL
DDR3-1866 CL9-10-9-28 1.5V
XMP PC3-1400 4GBX2

what i am experiencing is my system constantly tells me to close programs as im low on memory i have check allocated memory ect i have came to a conclusion it is a windows 10 issue

not sure what steps to take to accommodate this memory problem perhaps a fresh windows install ?
Reply With Quote
  #5  
Old 12-07-2016, 03:21 PM
GSKILL TECH's Avatar
GSKILL TECH GSKILL TECH is offline
Administrator
 
Join Date: Jul 2008
Location: Los Angeles, California
Posts: 13,005
GSKILL TECH has disabled reputation
Default

Yes, that can help reset everything
__________________
Are you an overclocker? Have screen shots of your OC results? Please post and share your OC experience!

The new G.Skill Overclocking Section!

http://www.gskill.us/forum/forumdisplay.php?f=43
Reply With Quote
Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -8. The time now is 02:29 AM.


Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
All rights reserved. Copyright 1989-2013, G.Skill International Enterprise