G.SKILL TECH FORUM

Go Back   G.SKILL TECH FORUM ? Product Discussion ? DDR3 ? BIOS Configuration for AMD Motherboards

BIOS Configuration for AMD Motherboards Discuss BIOS/EFI Configuration for specific AMD motherboards

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 03-02-2016, 10:24 AM
bemibe bemibe is offline
Junior Member
 
Join Date: Mar 2016
Posts: 2
bemibe is reading into overclocking
Default F3-12800CL7D-4GBECO+Gigabyte GA-890FXA-UD5+AMD Phenom II x4 945

Forgive me if this has already been answered, I searched the forums and tried the settings in the sticky but still haven't been able to figure it out. So here's the deal:

I have 4x2GB sticks of the RAM mentioned in the title. Everything seems to run fine if I install two sticks in slots 1 and 3 (DDR3_1 and DDR3_3) which according to the manual is Channel_0. I've tested all four sticks in this manner and they work fine. However, when I populate all four slots and fire it up, I get no POST, only some long beeps. Most of my settings are on auto. Are there some settings I should be adjusting to get all four sticks to work?

Thanks in advance!
Reply With Quote
  #2  
Old 03-16-2016, 04:59 PM
bemibe bemibe is offline
Junior Member
 
Join Date: Mar 2016
Posts: 2
bemibe is reading into overclocking
Default

It might be worth noting that I was told that overclocking is apparently only supported on one channel; however, I have not overclocked the memory at all. I've set it at 1600 or below.
Reply With Quote
  #3  
Old 03-17-2016, 11:08 AM
GSKILL TECH's Avatar
GSKILL TECH GSKILL TECH is offline
Administrator
 
Join Date: Jul 2008
Location: Los Angeles, California
Posts: 13,005
GSKILL TECH has disabled reputation
Default

So you have one module in blue and the other in white? DDR3_1 closest to CPU, and DDR3_3 third slot away from CPU?

If that's the case, the motherboard is defective. Considering everything is installed properly and CPU socket pins are good.
__________________
Are you an overclocker? Have screen shots of your OC results? Please post and share your OC experience!

The new G.Skill Overclocking Section!

http://www.gskill.us/forum/forumdisplay.php?f=43
Reply With Quote
Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -8. The time now is 01:08 AM.


Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
All rights reserved. Copyright 1989-2013, G.Skill International Enterprise