Announcement

Collapse
No announcement yet.

F2-8800CL5Q-8GBPI + GIGABYTE P35C-DS3R BIOS settings

Collapse
This is a sticky topic.
X
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • F2-8800CL5Q-8GBPI + GIGABYTE P35C-DS3R BIOS settings

    Here are the BIOS settings we used to test this particular motherboard and memory package. The latest F12 BIOS was used, and a Q9300 and E4300 were used for testing.

    CPU Host Clock Control - Enabled
    CPU Host Frequency - 344
    Performance Enhance - Standard
    System Memory Mulitplier - 3.20B
    DRAM Timing Selectable - Manual
    CAS Latency - 5
    tRCD - 5
    tRP - 5
    tRAS - 15

    Advanced Timing Control (submenu)
    tWR - 8

    Load Line Calibration - Disabled
    MCH Core - +0.1V
    DRAM Voltage - +0.1V
    FSB Voltage - +0.1V

    Thank you
    GSKILL SUPPORT

  • #2
    yo GSkill Tech.....I notice in most (if not all) of your settings when checking memory your LLC is disabled....is that by choice?? or is there a reason??
    Last edited by Dumaine; 02-07-2010, 06:33 AM.

    Comment


    • #3
      Just depending on system, and configuration, but these EP45 boards seem to do better without.

      Sorry, this is like an exactly 3 month late response.. overlooked it somehow.

      Thank you
      GSKILL TECH

      Comment

      Working...
      X