I have a little system with a Gigabyte GA-X150M-PLUS WS mb.I have 16 gigs of GSkill AEGIS F4-3000C16S. Right now I have it running with no problems at 2400 speed 13 14 14 36 1.40 volts. Any recommendations in help with some overclock settings to try appreciated.
Announcement
Collapse
No announcement yet.
GSkill AEGIS F4-3000C16S-8GISB OC
Collapse
X
-
Does the X150M-PLUS WS support memory overclocking at all?
I thought memory ratio and BCLK are locked on Intel C232.Team HardwareLUXX | Show off your G.SKILL products!
-
With a Kaby Lake Xeon? Then that is the default memory ratio for the processor (it was 2133 for Skylake).Team HardwareLUXX | Show off your G.SKILL products!
Comment
-
And does the UEFI allow you to set higher memory ratios or BCLK changes?
If not, then you are basically done already. With Skylake and Kaby Lake the real fun starts at DDR4-3866+, but you need a Z-chipset for that. Tweaking timings at DDR4-2400 brings you nowhere near that memory performance.Team HardwareLUXX | Show off your G.SKILL products!
Comment
-
So no memory overclocking possible, that's what i thought.Team HardwareLUXX | Show off your G.SKILL products!
Comment
-
I just checked the 2 memory sticks in cpu-z and the stick in mem slot one is F4-2133C15-8GIS,and in slot 2 is F4-3000C16-8GIS.Not a match, I told the computer tech guy to put 8 more gigs and he added the F4-3000C16 since he never had any 2133 mem in stock, he said it will just down clock. Should I stay with 2400 or go back to 2133 and tighten up the timings..
Comment
Comment