Announcement

Collapse
No announcement yet.

TridentZ RGB Series 32GB (2 x 16GB) amd ryzen 1800x compatible?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • TridentZ RGB Series 32GB (2 x 16GB) amd ryzen 1800x compatible?

    Hi, i have amd ryzen 1800X and motherboard asus crosshair hero VI and i want to buy G.SKILL TridentZ RGB Series 32GB (2 x 16GB) 288-Pin DDR4 SDRAM DDR4 3200 (PC4 25600) Desktop Memory Model F4-3200C14D-32GTZR Timing 14-14-14-34 CAS Latency 14 Voltage 1.35V but is it compatible ?
    thank you

  • #2
    Yes, but may be difficult to reach 3200 with 16GB modules. DRAM Frequency will be lower like DDR4-2666

    Comment


    • #3
      You can obtain 3200 now (o/c) versus before due to the new 1.0.0.6 AGESA protocol available from your motherboard UEFI/BIOS downloads section (if they have one yet).

      I have one for my ASRock X370 Pro Gaming Fatality board and have gotten it to work at 3200. That AMD compatible memory list I posted above shows that memory is compatible and has achieved that speed.

      I will post my settings for this board...I don't know what board u have, however, you will most likely have to tweak a bit

      Tim

      PS: Definitely check out: http://overclock.net/f/ - Find the Asus motherboard section, look for your particular board (there is usually an 'Official I own this board' section for the most popular boards' and then dive in. I guarantee you that someone has the settings for the BIOS listed.

      Here: http://www.overclock.net/f/11/amd-motherboards - Tons of information for that platform & memory.
      Here: http://www.overclock.net/t/1618914/g...-series-thread - GSKill Trident RGB AM4 Thread
      Last edited by n9nu; 07-08-2017, 12:03 PM.
      On-Line Gamer ID: Reactor-Criticalâ„¢
      Discord PC Gaming Server: discord.gg/W3bpPDD
      Mageia Linux Cauldron 64 - FreeNAS 10 64 - Win 10 Pro 64 Bit | ASRock X370 Pro Gaming Fatality Mobo | GSkill Ripjaw 16GB DDR4-3200 D/C | AMD Ryzen 1800X (Hydro H110i GT) | Nvidia Titan X Pascal | Samsung 990 Pro M.2 1TB SSD x 2 | Samsung 960 EVO 500TB VNAND SSD x 3 | Thermaltake Chaser ATX Case | Acer 27" LCD/LED IPS G-Sync 144Hz 3K Display | Saitek X-56 HOTAS FCS | G502 Gaming Mouse | Z-5500 THX 5.1 Sound System

      Comment


      • #4
        Originally posted by GSKILL TECH View Post
        Yes, but may be difficult to reach 3200 with 16GB modules. DRAM Frequency will be lower like DDR4-2666
        Difficult? Depending on the motherboard this may be impossible:

        Originally posted by Hexile View Post
        I tried Trident Z RGB on a gigabyte x370 motherboard, here is a summary:

        TLDR: currently extremely incompatible at any speed other than 2133 MHz!


        Full story:
        Motherboard is a Gigabyte GA-AX370-Gaming K7.
        Memory: G.SKILL F4-3600C17D-32GTZR
        (32GB (16 GB x 2) Trident Z RGB Series DDR4 3600 MHz C17)

        Setting any speed manually or using XMP gives a boot loop with error F9, but the memory configuration is reset after a few automatic restarts

        Before updating bios from version F3 to F4, XMP would only read this kit as 3200, but with F4, it is read correctly as 3600.

        With a beta bios called F5a the problem remains unaffected. I have poked any related setting without any progress.

        Comment

        Working...
        X