Announcement

Collapse
No announcement yet.

14900CL9-4GBXL | Crosshair Formula V | Phenom II

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • 14900CL9-4GBXL | Crosshair Formula V | Phenom II

    If you are experiencing RAM related lag or other general RAM performance issues with the combo listed in the title try these settings.
    Phenom 965 rev C or Higher for 1600mhz
    Everything lower @1333mhz

    CAS Latency:8 @1666mhz / 7 @1333mhz
    RAS to CAS Delay:8 @1666mhz / 7 @1333mhz
    RAS PRE Time:8 @1666mhz / 7 @1333mhz
    RAS ACT Time:24 @1666mhz / 21 @1333mhz
    Read to PRE Time:auto
    RAS to RAS Delay:auto
    Write to Read Delay:auto
    CAS Write Latency:auto
    Write Recovery Time:auto
    REF Cycle Time:auto
    Row Cycle Time:auto
    Read to Write Delay:auto
    Write to Read Delay(DD):auto
    Write to Write Timing:auto
    Read to Read Timing:auto
    Refresh Rate:auto
    Command Rate:2N @1666mhz / 1 @ 1333mhz

    Thanks to Admin Tradesman for helping me get this information.
    Last edited by ajilejay; 10-09-2011, 09:07 PM. Reason: Title Fix

  • #2
    Yeah but isnt this ram supposed to be able to Run at 1866 not 1333 anyone know the right setting in the bios to get it to run at 1866

    G.SKILL Ripjaws X Series
    16GB (2 x 8GB) DDR3 1866 Model F3-14900CL10D-16GBXL
    • DDR3 1866 (PC3 14900)
    • Timing 10-11-10-30
    • Cas Latency 10
    • Voltage 1.5V

    Comment


    • #3
      It is for those that would rather not overclock, or do not have much experience to overclock to DDR3-1866. The RAM can still perform extremely well and stable with other settings.

      Thank you
      GSKILL TECH

      Comment

      Working...
      X