I'm looking to pop the second set of my ram back into my rig and run the 16gb(4x4gb) at 1600mhz *currently 4x4GB at 9-9-9-25-2t/n 1.5v*. I would appreciate any assistance i can get with the bios settings, timings and voltages. I have my CPU at 4.5ghz(200Mhz x 22.5). I seem to have trouble when using guides and trying to get a nice HTT OC. I'm hoping to get these running as stable as possible for gaming and other constant use.
I am open to any sort of overclocking that may be necessary to get the best performance out of these non factory-matched kits.
-Windows 8.1 64bit
-FX-6350
--Corsair H55 with aftermarket high cfm fans push pull config
-Gigabyte 990fxa-ud3 rev 3.0
-2 TB 7200rpm sata 6gb/s HDD
-2x G.SKILL Sniper Series 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 1866 (PC3 14900) F3-14900CL9D-8GBSR
-EVGA GTX 660 Ti 2gb
-850w power supply
-CM Storm Scout 2 11x 120mm aftermarket high cfm fans
-Thanks again to Tradesman for help in the past.
I am open to any sort of overclocking that may be necessary to get the best performance out of these non factory-matched kits.
-Windows 8.1 64bit
-FX-6350
--Corsair H55 with aftermarket high cfm fans push pull config
-Gigabyte 990fxa-ud3 rev 3.0
-2 TB 7200rpm sata 6gb/s HDD
-2x G.SKILL Sniper Series 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 1866 (PC3 14900) F3-14900CL9D-8GBSR
-EVGA GTX 660 Ti 2gb
-850w power supply
-CM Storm Scout 2 11x 120mm aftermarket high cfm fans
-Thanks again to Tradesman for help in the past.
Comment