I am using G.Skill Ripjaws V 32GB (2 x 16GB) DDR4 3200MHz Memory (F4-3200C16D-32GVK) on an Aorus AX370 Gaming K7 motherboard with a Ryzen 1700X and these RAM modules just will not run at 3200Mhz. The MoBo Bios is the latest version (F7a with AGESA 1.0.0.6b) I have tried using the XMP profile with both sticks installed and using each stick on its own. The fastest I can get them to run is 2933Mhz by manually setting them in the bios which is so close to their full potential it is maddening.
Whenever the RAM is set to 3200Mhz (either manually or using the XMP profile) the system will not boot and the Error LED on the motherboard shows "F9" which is a "Memory initialization error" according to the MoBo manual.
Has anyone had any luck with this RAM set and got them working at the correct speeds? Any help in getting this RAm to run at it's rated speed would be greatly appreciated.
Whenever the RAM is set to 3200Mhz (either manually or using the XMP profile) the system will not boot and the Error LED on the motherboard shows "F9" which is a "Memory initialization error" according to the MoBo manual.
Has anyone had any luck with this RAM set and got them working at the correct speeds? Any help in getting this RAm to run at it's rated speed would be greatly appreciated.
Comment