Announcement

Collapse
No announcement yet.

How to get RipJaws 2800 to run at full frequency on X99

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • How to get RipJaws 2800 to run at full frequency on X99

    As I recall with my aging sieve-like memory, Intel has not fully updated their CPU f/w for the Intel i7-59xx to use DIMMs that have a higher frequency than 2400 or perhaps 2600 which is higher than the OEM resident 2133 spec'd for the X99 chipset.

    Since I have not built a computer for over 6 years, I am a bit rusty and behind in the technology (and don't miss ribbon cables at all ;-)

    For those that have an Asus X99 Deluxe motherboard -- what settings are you using in the UEFI to get your RipJaws F4-2800C16Q-16GRK to run at full 2800 MHz frequency??? (I assume you are using the 1.2 volts at which they are rated) OR are some fairly extreme OC'ing measures being taken if Intel is not supporting that high a frequency?)

    thanks
    Phantek Enthoo Pro tower, Asus X99 Deluxe, G.Skill RipJaws 2800 8x4GB, i7-5930K, 2 EVGA NVIDIA GTX 980 SuperOC'd in SLI, Corsair H105, Seasonic X-1250, Samsung Pro 840 256 GB SSD for OS/Programs, Samsung Pro 850 1 TB SSD for Data, WD Black 2 TB HDD for backup, Asus BD-Burner, AFT Pro-77U USB3 card reader, MaxKeyBoard X8, Logitech MX1100 mouse, SpectraView LCD2690WUXi2 w/ calibration software, Epson R3000 printer, etc.

  • #2
    I replied to your other thread. Let's continue there.
    Team HardwareLUXX | Show off your G.SKILL products!

    Comment

    Working...
    X