G.SKILL TECH FORUM

Go Back   G.SKILL TECH FORUM ? RMA Service ? North and South America

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 03-30-2017, 08:33 AM
chumanga chumanga is offline
Junior Member
 
Join Date: Sep 2013
Posts: 2
chumanga is reading into overclocking
Unhappy How i can get contact to support?

Hey people, im a bit unlucky today. I already was using a pair of DDR3 Trident X 2400 in my computer since 2015, so last week i decided to purchase another pair of same memory from same place which arrived yesterday. I installed it yesterday without issues. Today while i was using computer i watched my case Phantom 410 which has window at memory/CPU level and i see one of the new sticks dropped off over my GPU board. I get mad and turned computer off, when i opened i see only one side of heatspreader dropped the side which sustain red top off while memory was yet connected to mainboard.

i take the heatspreader without think and touched it again in memory stick to check what was wrong, i just thought there was no glue anymore, but the heatspreader touched the memory stick a bit off the exactly position and i guess the parts of heatspreader which touched the memory has some glue yet because it dont get off anymore. Now the heatspreader is connected out of right position and cant connect it to motherboard anymore and i dont know what to do exactly.

Should i remove the screws to dissasembly the heatspreader? Is my warranty avoided with that? I dont know why the heatspreader just dropped off the memory, make no sense at all and it was running perfectly yet when the heatspreader dropped off the memory.

Last edited by chumanga; 03-31-2017 at 02:01 AM.
Reply With Quote
  #2  
Old 03-30-2017, 09:00 AM
GSKILL TECH's Avatar
GSKILL TECH GSKILL TECH is offline
Administrator
 
Join Date: Jul 2008
Location: Los Angeles, California
Posts: 12,963
GSKILL TECH has disabled reputation
Default

That is odd, send it in for RMA and we can send you a new kit.

http://www.gskill.com/en/rma
__________________
Are you an overclocker? Have screen shots of your OC results? Please post and share your OC experience!

The new G.Skill Overclocking Section!

http://www.gskill.us/forum/forumdisplay.php?f=43
Reply With Quote
  #3  
Old 03-31-2017, 02:06 AM
chumanga chumanga is offline
Junior Member
 
Join Date: Sep 2013
Posts: 2
chumanga is reading into overclocking
Default

I will try see if retailer accept exchange or fix it for me first, if not i will try RMA.

Some screenshot how heatspreader get after i re-attached it.


https://i.imgur.com/YjfYdRm.jpg
https://i.imgur.com/ITrOwBG.jpg
https://i.imgur.com/bwA0GIP.jpg

I pay no attention to position when i attached it back then it gets blocking the motherboard clip position.
Reply With Quote
Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -8. The time now is 04:48 PM.


Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
All rights reserved. Copyright 1989-2013, G.Skill International Enterprise