F3-18666C9D-16GSR + FX8350 + Sabertooth 990FX R2.0

[zebrom]

Hello I want to run this stock what do I need to put the settings at and how do I do that.
Thanks

[GSKILL TECH]

Look around in your BIOS to get a feel for it. The motherboard user's manual serves the purpose of guiding you and giving you a general idea of where all the controls/features are. Then you need to enable XMP/DOCP, or manually input DRAM Frequency DDR3-1866, DRAM Timings tCL 9 - tRCD 10 - tRP 9 - tRAS 28, DRAM Voltage 1.50V, CPU-NB Voltage +0.1V. Once that is done, F10, save, exit, and see how those settings work. Notice all the RAM specifications are always listed on the RAM and packaging.

Keep us posted on the result!

Thank you
GSKILL TECH

[zebrom]

Thanks, I found everything but can't find CPU-NB Voltage where would that be

I have
CPU MANUAL VOLTAGE 1.332
CPU/NB MANUAL VOLTAGE 1.150

Do i have to change one of those?

[GSKILL TECH]

Cpu/nb manual voltage 1.150