Ripjaw V 3200c16 2x8g + MSI XPGTi ED

[Nico67]

Hi,

I can run XMP at 3200 ok, but while I had the VCCSA set at 1.100, I noticed it did actually bump the VCCIO up to 1.265 in Auto. I didn't think it had changed that so I was quite surprised. Anyway I dropped it to 1.050 and it didn't seem to like that much, so now I have,

VDIMM - 1.35
VCCSA - 1.200
VCCIO - 1.150

this seems ok, but I wanted to know if there are recommended setting for VCCSA and VCCIO when running XMP?.

I remember DDR3 wanting 1.25vccsa but never really needed that much

[GSKILL TECH]

Test and see what is best for your system. It varies with each CPU

[Nico67]

seems to be running ok, just bumped the VDimm up to 1.36 for good measure,

Vdimm - 1.360 - 1.360 real
Vccsa - 1.200 - 1.208 real
Vccio - 1.150 - 1.164 real

probably more than I need, but likely more stable that way and I think the VCCIO was too high on Auto causing monitor flickering issues. Time will tell on that one